Enclosures and housings
Submarine propeller shaft system
- Bounding box
- 756.2 × 786.8 × 900.1 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
CAD assembly of a submarine propeller shaft system, 4 separate parts coaxial on Z (mm): tapered propeller shaft with keyway, stud and coupling flange; stern tube bearing housing with flange and seal groove; 5-blade skewed propeller with tapered keyed hub and 15 mm root fillets; tail cone with hex recess and shaft nut.
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft diameter | 100 mm | 60 – 160 |
| Shaft start Z (forward end) | -400 mm | -600 – -200 |
| Shaft length | 700 mm | 500 – 1000 |
| Taper length | 150 mm | 100 – 200 |
| Taper ratio (1:n) | 12 | 8 – 20 |
| Keyway width | 20 mm | 10 – 30 |
| Keyway depth | 12 mm | 6 – 20 |
| Stud diameter | 70 mm | 50 – 80 |
| Stud length | 40 mm | 30 – 70 |
| Coupling flange diameter | 130 mm | 110 – 200 |
| Coupling flange thickness | 25 mm | 10 – 40 |
| Coupling bolt PCD | 100 mm | 80 – 120 |
| Coupling bolt hole diameter | 18 mm | 8 – 24 |
| Coupling bolt count | 6 | 3 – 12 |
| Housing bore | 100.5 mm | 100.1 – 105 |
| Housing outer diameter | 170 mm | 120 – 220 |
| Housing start Z | -150 mm | -300 – 0 |
| Housing length | 200 mm | 100 – 300 |
| Mounting flange diameter | 260 mm | 200 – 320 |
| Mounting flange thickness | 20 mm | 10 – 40 |
| Mounting bolt PCD | 220 mm | 190 – 280 |
| Mounting bolt hole diameter | 16 mm | 8 – 24 |
| Mounting bolt count | 8 | 4 – 16 |
| Seal groove mean radius | 63 mm | 55 – 80 |
| Seal groove width | 10 mm | 4 – 16 |
| Seal groove depth | 10 mm | 3 – 20 |
| Hub outer diameter | 220 mm | 160 – 280 |
| Hub length | 180 mm | 150 – 200 |
| Hub keyway depth (beyond bore) | 6 mm | 3 – 12 |
| Propeller diameter | 800 mm | 500 – 1000 |
| Blade count | 5 | 3 – 7 |
| Nominal pitch (constant-pitch helix) | 580 mm | 300 – 900 |
| Blade root station radius (inside hub) | 88 mm | 70 – 100 |
| Blade root thickness | 35 mm | 20 – 50 |
| Blade tip thickness | 6 mm | 3 – 15 |
| Blade root chord | 130 mm | 90 – 150 |
| Blade max chord | 190 mm | 120 – 260 |
| Blade tip chord | 80 mm | 40 – 140 |
| Blade skew at tip | 35 deg | 0 – 60 |
| Blade-to-hub fillet radius | 15 mm | 3 – 20 |
| Tail cone base diameter | 220 mm | 160 – 280 |
| Tail cone length | 200 mm | 150 – 300 |
| Tail cone tip radius | 20 mm | 5 – 40 |
| Hex recess across flats | 110 mm | 90 – 130 |
| Shaft nut across flats | 109 mm | 85 – 129 |
| Shaft nut thickness / recess depth | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
