Jigs and fixtures
Storage Facility Building
- Bounding box
- 6450.0 × 4000.0 × 3410.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 4, 2026
Download
Free to download and use. See the terms.
The prompt
● Scale: 1 : 50 ● Real room length = 6,0 m; Plan measured width = 8,0 cm ● Front Elevation Plan shows wall height = 2,6 m; Apex height = 3,4 m ● Both Door fixture D1 and Window fixture W1 are located on the same front wall of the storage facility and appear side-by-side on the Front Elevation Plan. Must include a scale bar : 1cm = 0.5 meters
Parameters
| Name | Value | Range |
|---|---|---|
| Building Length | 6000 mm | 1000 – 10000 |
| Building Width | 4000 mm | 1000 – 8000 |
| Wall Height | 2600 mm | 1000 – 5000 |
| Apex Height | 3400 mm | 1500 – 6000 |
| Wall Thickness | 200 mm | 50 – 500 |
| Door Width | 900 mm | 600 – 1500 |
| Door Height | 2100 mm | 1500 – 3000 |
| Window Width | 1200 mm | 600 – 2000 |
| Window Height | 1200 mm | 600 – 2000 |
| Window Sill Height | 900 mm | 300 – 1500 |
| Scale Bar Length | 500 mm | 100 – 1000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl