Enclosures and housings
Sticker Roll Dispenser Stack
- Bounding box
- 47 × 54.8 × 164.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Step 6: Spool pins. In every cell, add a solid round pin, pin_d = 7, sticking out from the inside face of the side plate (X = wall) along +X, centered in the cell at Y = wall + cell_d / 2 and Z = (top of the plate below) + cell_h / 2. Pin length = cell_w - 1.2, with a 0.6 mm chamfer on its tip. A spool slides onto each pin from the open side and spins on it.
Parameters
| Name | Value | Range |
|---|---|---|
| Backing liner width | 40 mm | 10 – 120 |
| Roll diameter | 45 mm | 20 – 120 |
| Number of stacked cells | 3 mm | 1 – 8 |
| Wall thickness | 2.4 mm | 1.2 – 6 |
| Horizontal plate thickness | 2 mm | 1.2 – 6 |
| Lid thickness allowance | 2 mm | 1.2 – 5 |
| Liner exit slot height | 2.5 mm | 1 – 8 |
| Thumb notch top width | 24 mm | 10 – 60 |
| Thumb notch depth | 7 mm | 2 – 15 |
| Header block height | 15.4 mm | 8 – 40 |
| Cleat slot depth from back face | 4.4 mm | 2 – 10 |
| Cleat slot height at its inner end | 13.4 mm | 4 – 35 |
| Label recess width | 40 mm | 10 – 120 |
| Label recess height | 9 mm | 4 – 30 |
| Label recess depth | 0.6 mm | 0.2 – 2 |
| Back-bottom wedge leg length | 7 mm | 3 – 20 |
| Bottom groove size | 3 mm | 1 – 8 |
| Lid stop block height | 4 mm | 2 – 15 |
| Lid stop block length along depth | 8 mm | 3 – 30 |
| Snap lip protrusion into channel | 0.3 mm | 0.1 – 1 |
| Spool pin diameter | 7 mm | 3 – 20 |
| Gap between pin tip and open side | 1.2 mm | 0 – 10 |
| Pin tip chamfer | 0.6 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
