3D preview of Sticker Roll Dispenser Stack
Loading the interactive model…
Interactive 3D model of Sticker Roll Dispenser Stack

Enclosures and housings

Sticker Roll Dispenser Stack

1 views
Bounding box
45 × 54.8 × 164.4 mm
Engine
3D Printing B-rep
Parameters
15
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Step 3: Add a solid header block on top of the stack: X 0 to body_w, Y 0 to body_d, Z stack_h to stack_h + header_h. Nothing may stick out past X = body_w. Cut a French-cleat hanging slot through the full width of the header, open to the back face. Side profile (Y, Z measured up from stack_h): (0, 0), (4.4, 0), (4.4, 13.4), (0, 9.0). Its top edge is a 45-degree slope, lowest at the back face; the cartridge hangs on a matching 45-degree wall cleat with it. Cut a 40 x 9 mm recess, 0.6 mm deep, centered on the header's front face, for a paper name label.

Parameters

NameValueRange
Backing liner width40 mm10 – 120
Roll diameter45 mm20 – 120
Number of stacked cells3 mm1 – 8
Wall thickness2.4 mm1.2 – 6
Horizontal plate thickness2 mm1.2 – 6
Lid thickness allowance2 mm1.2 – 5
Liner exit slot height2.5 mm1 – 8
Thumb notch top width24 mm10 – 60
Thumb notch depth7 mm2 – 15
Header block height15.4 mm8 – 40
Cleat slot depth from back face4.4 mm2 – 10
Cleat slot height at its inner end13.4 mm4 – 35
Label recess width40 mm10 – 120
Label recess height9 mm4 – 30
Label recess depth0.6 mm0.2 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Sticker Roll Dispenser Stack - Free CAD Model (STEP, STL) | TextoCAD