Enclosures and housings
Stepped U-Channel Scanner Enclosure
- Bounding box
- 450 × 350 × 280 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single-part stepped U-channel medical scanner enclosure measuring 450 mm long (X), 350 mm wide (Y), and 280 mm tall (Z), centered symmetrically on the Y-axis. Start with a solid rectangular block 450 mm long, 350 mm wide, and 280 mm tall. Cut away the upper front section from X = 0 to 180 mm down to a height of Z = 120 mm so the front section is 120 mm tall and the rear hood from X = 180 to 450 mm is 280 mm tall. Cut a central open-top U-channel trough 210 mm wide (from Y = -105 to 105 mm) and 15 mm above the bottom floor (Z = 15 mm) running from X = 0 to 180 mm. Continue that 210 mm wide opening as a rectangular tunnel 145 mm tall (from Z = 15 to 160 mm) into the rear hood from X = 180 to 380 mm. On both outer side walls, cut a horizontal slot 165 mm long and 22 mm tall centered at Z = 62 mm starting from X = 0 mm. On the top roof at Z = 280 mm, cut two parallel slots 100 mm long and 10 mm wide from X = 230 to 330 mm, spaced 110 mm apart at Y = -55 mm and Y = 55 mm. On both rear side walls at X = 395 mm and Z = 165 mm, cut a 76 mm diameter circular fan hole. Fillet the outer top longitudinal edges of the rear hood with a 35 mm radius and the vertical front corners with an 18 mm radius.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length X | 450 mm | 100 – 800 |
| Overall width Y | 350 mm | 100 – 600 |
| Overall height Z | 280 mm | 100 – 600 |
| Front section length | 180 mm | 50 – 400 |
| Front section height | 120 mm | 40 – 260 |
| Front vertical corner fillet | 18 mm | 1 – 60 |
| U-channel width | 210 mm | 50 – 400 |
| Floor thickness below channel | 15 mm | 3 – 60 |
| Tunnel height above floor | 145 mm | 40 – 260 |
| Tunnel end X position | 380 mm | 200 – 440 |
| Side slot length | 165 mm | 20 – 400 |
| Side slot height | 22 mm | 5 – 100 |
| Side slot centre height | 62 mm | 10 – 200 |
| Roof slot length | 100 mm | 20 – 300 |
| Roof slot width | 10 mm | 3 – 40 |
| Roof slot start X | 230 mm | 180 – 430 |
| Roof slot centre Y offset | 55 mm | 10 – 160 |
| Rear hood top edge fillet | 35 mm | 1 – 80 |
| Fan hole diameter | 76 mm | 20 – 140 |
| Fan hole centre X | 395 mm | 200 – 440 |
| Fan hole centre Z | 165 mm | 40 – 260 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
