3D preview of Stepped Shaft with Center Holes
Loading the interactive model…
Interactive 3D model of Stepped Shaft with Center Holes

Mechanical parts

Stepped Shaft with Center Holes

1 views
Bounding box
150.0 × 32.0 × 32.0 mm
Engine
Precision B-rep
Parameters
8
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Draw a horizontal center line (linetype: CENTER) 160 mm long. Draw the bottom half (or full contour) using LINE / POLYLINE: Left thick cylinder (Datum B): length = 20 mm, diameter = 32 mm (radius 16 mm from center line). Right long shaft (Datum A): length = 130 mm (total length = 150 mm), diameter = 22 mm (radius 11 mm). Draw the center hole on both end faces (Detail X): Ø2.5 mm pilot hole and Ø5 mm countersink at 60°. Add the dimensions (DIMLINEAR): Total length: 150 %%p0.1 Head length: 20 +0.4/-0.3 Left diameter: %%c32 0/-0.1 Right diameter: %%c22 0/-0.1 Add the geometric tolerance frames using the TOLERANCE command: Cylindricity 0.01 above Ø32 and cylindricity 0.03 above Ø22. Total radial runout 0.01 relative to A-B on the shaft. Datum triangles A (on Ø22) and B (on Ø32). Fill in the title block at the bottom: Material = St37-2 | Raw size = Ø30x153 | General roughness = Ra 6.3.

Parameters

NameValueRange
Total Length150 mm120 – 200
Head Length Datum B20 mm12 – 50
Left Diameter Datum B32 mm20 – 60
Right Diameter Datum A22 mm10 – 50
Center Hole Pilot Diameter2.5 mm1 – 5
Countersink Diameter5 mm3.5 – 10
Countersink Angle60 deg30 – 120
Center Hole Depth7.5 mm3 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Stepped Shaft with Center Holes - Free CAD Model (STEP, STL) | TextoCAD