Enclosures and housings
Stepped Mounting Plate with Large Bearing Bore
- Bounding box
- 1.8 × 1.8 × 0.4 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid mechanical part, unit: inch. Overall: total length 1.790, total height 1.770, main thickness 0.390. Left side thin section thickness 0.296. Features: 1. 2 holes: Φ0.070 counterbore, counterbore depth 0.100, 2-56 UNC thread hole, thread depth 0.080, center height 1.674 2. Φ0.136 through hole, 8-32 UNC through hole, center height 1.280 3. Center main hole: Φ0.7495 (tolerance 0/-0.0005), counterbore Φ0.870, depth 0.870 4. 2 pcs Φ0.560 through holes below main hole 5. 2 pcs Φ0.063 dowel pin holes, 0.125 from surface 6. 2 pcs Φ0.150 through slot at bottom 7. Φ0.125 through hole to inside No chamfers, no fillets, sharp corners. Keep all dimension positions same as drawing. Output editable parametric model.
Parameters
| Name | Value | Range |
|---|---|---|
| Total Length | 1.79 in | 1 – 4 |
| Total Height | 1.77 in | 1 – 4 |
| Main Thickness | 0.39 in | 0.1 – 1 |
| Left Thin Section Thickness | 0.3 in | 0.05 – 0.9 |
| Left Thin Section Width | 0.42 in | 0.1 – 1.2 |
| Main Bore Diameter | 0.75 in | 0.4 – 1.2 |
| Main Counterbore Diameter | 0.87 in | 0.5 – 1.4 |
| Main Counterbore Depth (drawing 0.870 exceeds plate thickness) | 0.25 in | 0.05 – 0.35 |
| Main Bore Center X | 0.9 in | 0.4 – 1.5 |
| Main Bore Center Y | 1.2 in | 0.5 – 1.6 |
| 2-56 Thread Hole Diameter | 0.07 in | 0.03 – 0.12 |
| 2-56 Counterbore Diameter | 0.1 in | 0.08 – 0.2 |
| 2-56 Counterbore Depth | 0.1 in | 0.02 – 0.2 |
| 2-56 Thread Depth | 0.08 in | 0.02 – 0.2 |
| 2-56 Hole Center Height | 1.67 in | 0.8 – 1.74 |
| 2-56 Hole Spacing | 1.29 in | 0.3 – 1.6 |
| 8-32 Through Hole Diameter | 0.14 in | 0.06 – 0.3 |
| 8-32 Hole Center X | 0.25 in | 0.1 – 1.7 |
| 8-32 Hole Center Height | 1.28 in | 0.2 – 1.7 |
| Large Through Hole Diameter | 0.56 in | 0.2 – 0.8 |
| Large Hole Spacing | 1.12 in | 0.4 – 1.3 |
| Large Hole Center Height | 0.45 in | 0.15 – 0.9 |
| Dowel Pin Hole Diameter | 0.06 in | 0.03 – 0.15 |
| Dowel Hole Edge Offset | 0.13 in | 0.06 – 0.5 |
| Dowel Hole Center Height | 1.65 in | 0.2 – 1.72 |
| Slot Width | 0.15 in | 0.06 – 0.3 |
| Slot Overall Length | 0.3 in | 0.16 – 0.8 |
| Slot Center Spacing | 0.59 in | 0.25 – 1.2 |
| Slot Center Height | 0.08 in | 0.06 – 0.25 |
| Side Hole Diameter | 0.13 in | 0.05 – 0.3 |
| Side Hole Center Y | 1.2 in | 0.3 – 1.6 |
| Side Hole Center Z | 0.2 in | 0.06 – 0.34 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,