Enclosures and housings
Stepped Axle Shaft with Splined End
- Bounding box
- 48.0 × 48.0 × 650.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 2D technical drawing of a long stepped cylindrical axle shaft according to GOST standard. Show strictly front view (lengthwise horizontal layout) on a clean white background with black solid lines. Total part length L = 650 mm. The shaft consists of a smooth central section with a diameter of Ø 45 mm and a length of 490 mm. Left end section (differential side) has a diameter of Ø 48 mm and a length of 75 mm. Right end section (wheel hub side) has an overall diameter of Ø 48 mm and a total length of 85 mm. This right end section contains exactly two separate spline crowns divided by a narrow, shallow technological groove. The groove width is 5 mm with a minor diameter reduction. Apply small smooth transition radii (3 mm fillets) at all vertical shoulder steps where the diameter changes from Ø 45 mm to Ø 48 mm to match the forged factory finish. Include standard 2 mm chamfers on both outermost tips of the shaft. Add horizontal dimension lines for total length 650 mm, left section 75 mm, right section 85 mm, and vertical diameters Ø 45 mm and Ø 48 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Total Length L | 650 mm | 200 – 1200 |
| Left Section Length | 75 mm | 10 – 250 |
| Right (Splined) Section Length | 85 mm | 20 – 250 |
| Central Diameter | 45 mm | 15 – 120 |
| End Section Diameter | 48 mm | 15 – 120 |
| Technological Groove Width | 5 mm | 1 – 20 |
| Groove Minor Diameter | 44 mm | 10 – 47 |
| Spline Tooth Count | 8 pcs | 4 – 24 |
| Spline Minor Diameter | 42 mm | 10 – 47 |
| Spline Groove Width | 5 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no