Enclosures and housings
Stencil Transport Cart (8 vertical slots + horizontal slot)
- Bounding box
- 1035.0 × 800.0 × 1000.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Stencil cart for SMT: 750x750x30 mm stencils, 8 vertical slots (40 mm fit + 20 mm finger gap), sliding-door cabinet open on one side, horizontal stencil holding slot above the cabinet, free top tray with 35 mm rim, bin space plus 2 roll-wiper shelves, handrails on head and tail ends, 4 ESD wheels dia 100. Body 900 x 800 mm, sheet steel 1.5 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length (X) | 900 mm | 600 – 1200 |
| Body width (Y) | 800 mm | 600 – 1100 |
| Sheet steel thickness | 1.5 mm | 1 – 3 |
| Base height | 20 mm | 10 – 60 |
| Vertical cavity height | 760 mm | 700 – 850 |
| Cabinet top plate | 10 mm | 3 – 30 |
| Horizontal slot clear height | 40 mm | 32 – 60 |
| Ceiling / tray floor plate | 10 mm | 3 – 30 |
| Slot guide X from end | 70 mm | 20 – 150 |
| Stopper position (Y) | 725 mm | 600 – 780 |
| Tray rim height | 35 mm | 20 – 60 |
| Vertical stencil slots | 8 pcs | 2 – 10 |
| Slot pitch | 60 mm | 50 – 80 |
| Clear gap between fins | 40 mm | 34 – 55 |
| First slot offset from end | 20 mm | 5 – 60 |
| Guide fin length (Y) | 760 mm | 600 – 790 |
| Guide fin height | 20 mm | 10 – 40 |
| Utility zone partition X | 580 mm | 520 – 650 |
| Shelf thickness | 10 mm | 3 – 20 |
| Shelf 1 height (Z) | 480 mm | 200 – 600 |
| Shelf 2 height (Z) | 630 mm | 300 – 740 |
| Handrail tube diameter | 25 mm | 18 – 38 |
| Handrail centerline height (Z) | 810 mm | 600 – 900 |
| Handrail standoff from end wall | 55 mm | 40 – 100 |
| Support arm diameter | 12 mm | 8 – 20 |
| Support arm 1 position (Y) | 200 mm | 50 – 400 |
| Support arm 2 position (Y) | 600 mm | 400 – 750 |
| Wheel diameter | 100 mm | 75 – 160 |
| Caster mount height above wheel | 25 mm | 15 – 60 |
| Wheel width | 30 mm | 20 – 50 |
| Wheel inset from corner | 60 mm | 50 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no