Everything else
Steel Transport Frame + Photo Frame
- Bounding box
- 149 × 188 × 207.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
kan du bruke skissen jeg har sendt ved? Det skal være en transport ramme laget i stål, firkantør
Parameters
| Name | Value | Range |
|---|---|---|
| Photo width | 100 mm | 40 – 300 |
| Photo height | 150 mm | 40 – 400 |
| Border width around the window | 14 mm | 8 – 40 |
| Frame thickness front-to-back | 11 mm | 6 – 25 |
| Window overlap onto the photo | 5 mm | 2 – 15 |
| Depth of the rear photo pocket | 5.5 mm | 3 – 10 |
| Outer corner radius | 6 mm | 0 – 20 |
| Back panel thickness | 2.5 mm | 1.2 – 5 |
| Total clearance in pocket | 0.3 mm | 0.1 – 0.6 |
| How far the panel stands proud | 0.8 mm | 0 – 3 |
| Leg width | 22 mm | 10 – 50 |
| Leg thickness | 3.5 mm | 2 – 8 |
| Front lip length over the frame face | 12 mm | 4 – 30 |
| Hook cap thickness | 3 mm | 2 – 8 |
| Foot distance behind the frame | 55 mm | 20 – 150 |
| Model scale 1:N | 15 mm | 5 – 40 |
| Column height, item 1 | 3000 mm | 500 – 4000 |
| Base tube length, item 2 | 2000 mm | 500 – 3000 |
| Base length in front of the column | 650 mm | 0 – 1500 |
| Distance between the two sides | 1900 mm | 300 – 3000 |
| Main square tube 100x100 | 100 mm | 40 – 200 |
| Cross tube 80x80, item 6 | 80 mm | 30 – 150 |
| Top pipe OD, item 5 | 114.3 mm | 40 – 300 |
| Upper brace height on the column | 1300 mm | 200 – 2900 |
| Upper brace horizontal run | 1050 mm | 100 – 2500 |
| Lower brace height on the column | 750 mm | 100 – 2000 |
| Lower brace horizontal run | 600 mm | 100 – 2000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
Hexapod Robot with Stewart Platform
parallel platforms hexapod , stewart gough platform