Brackets and mounts
Steel Corner Post Assembly
- Bounding box
- 255.1 × 255.1 × 1844.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precision steel corner post assembly in millimeters. Start with a square baseplate 200mm x 200mm x 10mm thick on the XY plane centered at (0,0,0), with four 18mm diameter through-holes at (±70mm, ±70mm). Centered on top of the baseplate, extrude an 80mm x 80mm hollow square tube (4mm wall thickness) vertically 1830mm tall along the Z axis, capped at the top with an 80mm x 80mm x 4mm flat plate. At the base of the post, add four triangular gusset plates (8mm thick, 80mm wide along the baseplate, 140mm tall up the post faces) centered on each of the four sides. On two adjacent vertical faces oriented at 135 degrees internal angle to each other (normals at 22.5 degrees and 157.5 degrees), add twin-ear clevis brackets at two heights: Z = 450mm and Z = 1730mm. Each clevis bracket consists of two parallel 8mm thick steel plates spaced 46mm apart, projecting 100mm outward from the post face and 80mm tall, with a 14mm diameter through-hole centered 65mm from the post face.
Parameters
| Name | Value | Range |
|---|---|---|
| Baseplate Length | 200 mm | 80 – 500 |
| Baseplate Width | 200 mm | 80 – 500 |
| Baseplate Thickness | 10 mm | 4 – 40 |
| Anchor Hole Diameter | 18 mm | 6 – 40 |
| Anchor Hole Offset | 70 mm | 20 – 200 |
| Tube Outside Width | 80 mm | 40 – 250 |
| Tube Wall Thickness | 4 mm | 2 – 20 |
| Tube Height | 1830 mm | 300 – 3500 |
| Tube Rotation About Z | 22.5 deg | 0 – 90 |
| Top Cap Plate Thickness | 4 mm | 2 – 25 |
| Gusset Thickness | 8 mm | 3 – 30 |
| Gusset Leg Along Baseplate | 80 mm | 20 – 200 |
| Gusset Leg Up Post | 140 mm | 30 – 500 |
| Clevis Plate Thickness | 8 mm | 3 – 30 |
| Clear Gap Between Plates | 46 mm | 10 – 200 |
| Outward Projection | 100 mm | 30 – 350 |
| Clevis Plate Height | 80 mm | 20 – 350 |
| Pin Hole Diameter | 14 mm | 4 – 60 |
| Pin Hole From Post Face | 65 mm | 15 – 300 |
| Lower Bracket Height (Z) | 450 mm | 60 – 1800 |
| Upper Bracket Height (Z) | 1730 mm | 100 – 1800 |
| Bracket Pair A Face Normal | 22.5 deg | 0 – 360 |
| Bracket Pair B Face Normal | 112.5 deg | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
