Jigs and fixtures
Stair Stringer with Treads and Standoffs
- Bounding box
- 3950.6 × 1524.0 × 3864.4 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
THE STANDOFFS SHOULD BE CONNCECTED TO THE CENTER OF THE UNDERSIDE OF THE TREADS AND THE STANDOFFS SHOULD WE CONNCECTED TO THE STRINGER
Parameters
| Name | Value | Range |
|---|---|---|
| Stringer Section (outer) | 304.8 mm | 100 – 500 |
| Stringer Wall Thickness | 6.35 mm | 2 – 20 |
| Stringer Length (slope distance) | 3000 mm | 1000 – 6000 |
| Total Rise | 1500 mm | 500 – 3000 |
| Number of Treads per side | 8 | 2 – 20 |
| Tread Total Width | 1219.2 mm | 500 – 2000 |
| Tread Depth (run) | 279.4 mm | 100 – 500 |
| Tread Thickness | 76.2 mm | 20 – 150 |
| Standoff Section (outer) | 101.6 mm | 50 – 200 |
| Standoff Wall Thickness | 6.35 mm | 2 – 20 |
| Standoff Height (not used, computed) | 200 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl