Enclosures and housings
Stainless Steel Food-Processing Work Table
- Bounding box
- 2000.0 × 1000.0 × 900.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
Design a professional stainless steel working table for industrial food-processing applications. OVERALL DIMENSIONS: Length: 2,000 mm. Width: 1,000 mm. Total height: 900 mm. MATERIAL AND CONSTRUCTION: Material: AISI 304 stainless steel. Worktop: 2 mm thick stainless steel sheet with a smooth, flat surface and reinforced underside to prevent bending. Worktop edges: Rounded corners with a 10 mm radius and smooth, hygienic edges. Frame: Welded stainless steel square tubing, 40 x 40 x 2 mm. Legs: Four stainless steel square-tube legs positioned near the corners. Feet: Four adjustable stainless steel levelling feet with a 50 mm adjustment range. Lower shelf: One stainless steel shelf, 1.5 mm thick, positioned 200 mm above floor level, with adequate clearance around the legs. Include horizontal cross-bracing underneath the worktop to provide structural stability. HYGIENIC DESIGN: Suitable for industrial food-processing environments. Smooth, continuous welded joints with no exposed sharp edges. Minimise crevices and areas where water or food residues could accumulate. Provide a flat working surface without a rear backsplash. CAD MODELLING REQUIREMENTS: Create a dimensionally accurate, fully assembled 3D CAD model. Model the worktop, frame, legs, levelling feet and lower shelf as separate solid bodies. Use realistic wall thicknesses and ensure that all components are correctly positioned and connected. Generate a watertight solid CAD assembly using B-rep geometry rather than a polygon mesh. Export the completed model as a STEP (.step) file compatible with SolidWorks, Autodesk Inventor and FreeCAD. Use millimetres as the measurement unit.
Parameters
| Name | Value | Range |
|---|---|---|
| Worktop Length | 2000 mm | 1000 – 3000 |
| Worktop Width | 1000 mm | 500 – 1500 |
| Sheet Thickness | 2 mm | 1 – 5 |
| Corner Radius | 10 mm | 2 – 40 |
| Under-Side Stiffener Count | 2 pcs | 0 – 6 |
| Stiffener Width | 30 mm | 10 – 100 |
| Stiffener Height | 20 mm | 5 – 60 |
| Square Tube Size | 40 mm | 20 – 80 |
| Tube Wall Thickness | 2 mm | 1 – 5 |
| Frame Inset From Top Edge | 20 mm | 0 – 100 |
| Leg Length | 838 mm | 600 – 1000 |
| Shelf Length | 1920 mm | 800 – 3000 |
| Shelf Width | 920 mm | 300 – 1500 |
| Shelf Thickness | 1.5 mm | 0.8 – 5 |
| Shelf Top Height Above Floor | 200 mm | 50 – 600 |
| Shelf Support Rail Height | 20 mm | 5 – 60 |
| Foot Pad Diameter | 50 mm | 20 – 120 |
| Foot Pad Height | 14 mm | 5 – 40 |
| Threaded Stud Diameter | 24 mm | 10 – 40 |
| Lock Nut Across Flats | 36 mm | 15 – 60 |
| Lock Nut Height | 8 mm | 4 – 20 |
| Cross-Brace Drop Below Frame | 0 mm | 0 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no