Mechanical parts
Staffa PETG — sedi dadi 3,3 mm e viti M4×12
- Bounding box
- 104.0 × 75.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Correzione approvata: mantenuto spessore totale10mm ai quattro fissaggi, ridotta profondità delle quattro sedi dadi interne da7.5 a3.3mm per dadiM4 spessi circa3-3.2mm. Sedi7.4mm tra facce e smusso0.4 invariati. Viti aggiornate aM4x12 inserite dall'esterno: parete sotto dado6.7mm + dado3.2mm + fino2mm pezzo esterno/rondella=11.9mm. Tutto il resto invariato: rampe inferiori/superiori speculari, alleggerimenti esagonali simmetrici45°, raccordi e smussi, orientamento su fianco, nessun supporto removibile.
Parameters
| Name | Value | Range |
|---|---|---|
| Larghezza | 80 mm | 76 – 150 |
| Altezza esterna | 104 mm | 104 – 200 |
| Profondità esterna | 70 mm | 65 – 150 |
| Spessore piastre | 5 mm | 4 – 8 |
| Foro centrale | 40 mm | 30 – 42 |
| Circonferenza fori | 60 mm | 56 – 64 |
| Passaggio viti M4 | 4.4 mm | 4.2 – 4.6 |
| Fori muro | 5 mm | 4 – 6 |
| Interasse fori muro | 40 mm | 36 – 44 |
| Posizione fori muro | 35 mm | 30 – 40 |
| Raggio angoli esterni | 8 mm | 4 – 10 |
| Raggio raccordo interno continuo | 8 mm | 5 – 10 |
| Spessore nervature | 5 mm | 4 – 6 |
| Sviluppo nervature sulla base | 35 mm | 25 – 40 |
| Altezza nervature | 30 mm | 25 – 35 |
| Centro foro inferiore dal bordo basso | 29 mm | 26 – 30 |
| Raggio esagoni | 4.5 mm | 3 – 5 |
| Separazione esagoni | 2.5 mm | 2 – 4 |
| Bordo pieno esterno | 7 mm | 6 – 9 |
| Fascia piena giunzione | 15 mm | 14 – 18 |
| Corona piena foro centrale | 5 mm | 4 – 7 |
| Spessore totale ai quattro fori | 10 mm | 10 – 14 |
| Raggio base risalti posteriori | 8 mm | 7 – 8.5 |
| Raggio estremità risalti | 6.5 mm | 6 – 7 |
| Zona piena attorno fissaggi base | 7 mm | 6 – 8 |
| Sede dado: distanza tra facce | 7.4 mm | 7.2 – 7.6 |
| Profondità sede dado dall'interno | 3.3 mm | 3.2 – 3.6 |
| Smusso imbocco sedi dadi | 0.4 mm | 0.2 – 0.6 |
| Sviluppo rampa nervatura alta | 35.5 mm | 35 – 40 |
| Raccordo base risalti | 0.8 mm | 0.4 – 1 |
| Smusso ingressi fori circolari | 0.5 mm | 0.25 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
