Enclosures and housings
Staffa PETG rifinita — dadi M4 e nervatura a 45°
- Bounding box
- 104.0 × 75.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Staffa rifinita: rampa nervatura alta35.5mm con crescita<=45° nella stampa su fianco, aperture simmetriche45° passanti anche nel rinforzo. RaccordiR0.8 su tutti4 risalti posteriori; smussi0.5 su Ø40, Ø5 e ingresso esternoØ4.4. Sedi dadiM4 7.4AF profonde7.5mm, vitiM4x8 con pezzo+rondella fino2mm. Quote e orientamento conservati. Nessun supporto sacrificabile. Validità solido verificata; slicing e resistenza da provare.
Parameters
| Name | Value | Range |
|---|---|---|
| Larghezza | 80 mm | 76 – 150 |
| Altezza esterna | 104 mm | 104 – 200 |
| Profondità esterna | 70 mm | 65 – 150 |
| Spessore piastre | 5 mm | 4 – 8 |
| Foro centrale | 40 mm | 30 – 42 |
| Circonferenza fori | 60 mm | 56 – 64 |
| Passaggio viti M4 | 4.4 mm | 4.2 – 4.6 |
| Fori muro | 5 mm | 4 – 6 |
| Interasse fori muro | 40 mm | 36 – 44 |
| Posizione fori muro | 35 mm | 30 – 40 |
| Raggio angoli esterni | 8 mm | 4 – 10 |
| Raggio raccordo interno continuo | 8 mm | 5 – 10 |
| Spessore nervature | 5 mm | 4 – 6 |
| Sviluppo nervature sulla base | 35 mm | 25 – 40 |
| Altezza nervature | 30 mm | 25 – 35 |
| Centro foro inferiore dal bordo basso | 29 mm | 26 – 30 |
| Raggio esagoni | 4.5 mm | 3 – 5 |
| Separazione esagoni | 2.5 mm | 2 – 4 |
| Bordo pieno esterno | 7 mm | 6 – 9 |
| Fascia piena giunzione | 15 mm | 14 – 18 |
| Corona piena foro centrale | 5 mm | 4 – 7 |
| Spessore totale ai quattro fori | 10 mm | 10 – 14 |
| Raggio base risalti posteriori | 8 mm | 7 – 8.5 |
| Raggio estremità risalti | 6.5 mm | 6 – 7 |
| Zona piena attorno fissaggi base | 7 mm | 6 – 8 |
| Sede dado: distanza tra facce | 7.4 mm | 7.2 – 7.6 |
| Profondità sede dado dall'interno | 7.5 mm | 7 – 7.6 |
| Smusso imbocco sedi dadi | 0.4 mm | 0.2 – 0.6 |
| Sviluppo rampa nervatura alta | 35.5 mm | 35 – 40 |
| Raccordo base risalti | 0.8 mm | 0.4 – 1 |
| Smusso ingressi fori circolari | 0.5 mm | 0.25 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
