Enclosures and housings
Square Platform with Integrated Hollow Telescopic Pillar
- Bounding box
- 35 × 35 × 46 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable STL model consisting of a single integrated component: a square platform with a hollow vertical outer telescopic pillar attached centrally underneath it. Specifications: - Platform: 35 × 35 mm, thickness 4 mm. - Outer pillar: square cross-section, external dimensions 18 × 18 mm. - Internal hollow section: 12.6 × 12.6 mm, allowing the 12 × 12 mm inner pillar to slide inside with approximately 0.3 mm clearance per side. - Outer pillar length: 42 mm. - The pillar must be open at its bottom and integrated directly into the underside of the platform. - Create one horizontal cylindrical through-hole, diameter 5.3 mm, passing through both opposite walls of the outer pillar. - Position the hole centre 10 mm above the bottom end of the outer pillar. - The hole must align with any of the seven adjustment holes on the inner pillar when the platform is moved vertically. - Ensure the internal cavity remains unobstructed so the inner pillar can slide freely. IMPORTANT: The platform MUST be physically integrated with the outer telescopic pillar. It must move up and down together with the outer pillar. The platform must NOT rest on or be supported by the fixed inner pillar. Ensure adequate wall thickness, clean geometry and suitability for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Platform width/depth | 35 mm | 20 – 200 |
| Platform thickness | 4 mm | 2 – 10 |
| Outer pillar width/depth | 18 mm | 10 – 50 |
| Internal cavity width/depth | 12.6 mm | 6 – 20 |
| Outer pillar length | 42 mm | 20 – 100 |
| Cross-hole diameter | 5.3 mm | 3 – 10 |
| Cross-hole height above pillar bottom | 10 mm | 2 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
