Enclosures and housings
Square Hopper
- Bounding box
- 384.3 × 384.3 × 331.3 mm
- Engine
- Precision B-rep
- Parameters
- 4
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a truncated pyramid sheet metal hopper. Units are millimeters. The hopper has a wall thickness of 1.5mm. The top opening is a horizontal square measuring 350mm x 350mm. The bottom discharge opening is a horizontal square measuring 100mm x 100mm. The vertical height from the top rim to the bottom opening is exactly 300mm. The geometry must be perfectly centered on the X and Y axes. The inside of the hopper must be completely hollow and open at both the top and bottom ends. Output as a 3D sheet metal solid model.
Parameters
| Name | Value | Range |
|---|---|---|
| Top inner side | 350 mm | 50 – 1000 |
| Bottom inner side | 100 mm | 10 – 500 |
| Height | 300 mm | 10 – 1000 |
| Wall thickness | 1.5 mm | 0.5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no