Mechanical parts
Square Flange 200x200 with 45deg Bolt Circles
- Bounding box
- 200 × 200 × 22 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create 20 cm X 20 cm sweep circular and bolte hole outer amd innet at 45 deg angual
Parameters
| Name | Value | Range |
|---|---|---|
| Square plate side | 200 mm | 100 – 400 |
| Plate thickness | 12 mm | 4 – 40 |
| Corner rounding | 10 mm | 0 – 40 |
| Hub outer diameter | 130 mm | 60 – 250 |
| Hub height above plate | 10 mm | 2 – 60 |
| Centre bore diameter | 60 mm | 10 – 150 |
| Bolt hole diameter | 10.5 mm | 3 – 24 |
| Holes per bolt circle | 8 mm | 4 – 24 |
| Outer bolt circle diameter | 160 mm | 80 – 340 |
| Inner bolt circle diameter | 90 mm | 50 – 300 |
| Inner circle angular offset | 22.5 deg | 0 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Frame Drone 5 inch Stretched X (1503, FC 30.5, TOF, Arm Polos)
Frame drone 5 inch stretched X persegi panjang, motor 1503 3 baut, ujung arm bentuk X polos tanpa cekungan, FC 30.5, spacer, lubang TOF
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
