3D preview of Square Electronics Enclosure
Loading the interactive model…
Interactive 3D model of Square Electronics Enclosure

Brackets and mounts

Square Electronics Enclosure

1 views
Bounding box
68 × 68 × 68 mm
Engine
3D Printing B-rep
Parameters
32
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Design a hollow square electronics enclosure measuring 68 mm wide by 68 mm deep by 68 mm tall, with 2.5 mm wall thickness and 2 mm fillets on vertical outer corners. Include a removable top lid or two-part split body so the inside is accessible. On the front face, cut a centered rectangular display window measuring 28 mm wide by 28 mm tall with a 0.4 mm extra clearance border around the display opening. On a side wall, add two separate rectangular USB Type-C port cutouts measuring 9.5 mm wide by 3.6 mm tall each, spaced 18 mm apart horizontally and positioned 10 mm above the bottom floor. On an adjacent wall, add a small circular group of 7 holes, each 1.5 mm in diameter spaced 3.5 mm apart, for a mini speaker, and a single 1.8 mm circular hole nearby for a microphone. Inside the lower base, add a simple rectangular mounting cradle and four 3 mm tall support posts for a microcontroller board, leaving open space inside for internal wiring and components.

Parameters

NameValueRange
Outer width68 mm20 – 200
Outer depth68 mm20 – 200
Base height60 mm20 – 200
Wall thickness2.5 mm1.2 – 6
Vertical corner fillet2 mm0 – 10
Floor thickness2.5 mm1 – 10
Display opening width28 mm5 – 120
Display opening height28 mm5 – 120
Extra clearance per side0.4 mm0 – 2
Display center height30 mm10 – 55
USB cutout width9.5 mm4 – 25
USB cutout height3.6 mm2 – 15
USB center spacing18 mm6 – 50
USB height above floor10 mm2 – 50
Speaker hole diameter1.5 mm0.8 – 5
Speaker hole spacing3.5 mm1.5 – 10
Speaker cluster center height30 mm10 – 55
Microphone hole diameter1.8 mm0.8 – 5
Mic X offset from speaker center10 mm3 – 30
Cradle outer width30 mm10 – 55
Cradle outer depth20 mm10 – 55
Cradle wall thickness2 mm1 – 5
Cradle height4 mm2 – 15
Support post diameter3 mm2 – 8
Support post height3 mm1 – 12
Post X spacing20 mm8 – 40
Post Y spacing12 mm8 – 40
Lid plate thickness4 mm2 – 10
Locating lip height5 mm2 – 12
Press-fit overlap0.5 mm0.2 – 1.5
Lip side clearance0.3 mm0.1 – 0.8
Locating lip wall2 mm1 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Square Electronics Enclosure - Free CAD Model (STEP, STL) | TextoCAD