Enclosures and housings
Square Base Plate with Telescoping Pillar
- Bounding box
- 145.0 × 145.0 × 65.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable STL model consisting of a single integrated component: a square base plate with a centrally positioned vertical inner telescopic pillar. Specifications: - Base plate: 145 × 145 mm, thickness 5 mm. - Inner pillar: square cross-section, 12 × 12 mm, height 60 mm, positioned centrally on the base plate. - Integrate the pillar directly into the base plate. - Create 7 horizontal cylindrical through-holes, diameter 5.3 mm, passing completely through the pillar. - Holes must run horizontally through the pillar, perpendicular to its vertical axis. - Hole spacing: 6 mm centre-to-centre. - Position the holes symmetrically along the pillar's vertical axis. - The fourth (middle) hole is the reference position. - Ensure sufficient material above and below the holes. - All geometry must be solid, manifold and suitable for FDM 3D printing. IMPORTANT: The pillar must be perfectly straight and perpendicular to the base plate. Do not create a separate pillar or additional assembly components.
Parameters
| Name | Value | Range |
|---|---|---|
| Base side | 145 mm | 50 – 300 |
| Base thickness | 5 mm | 2 – 15 |
| Pillar side | 12 mm | 8 – 40 |
| Pillar height | 60 mm | 50 – 120 |
| Hole diameter | 5.3 mm | 1 – 9 |
| Hole spacing | 6 mm | 3 – 6 |
| Number of holes | 7 count | 1 – 9 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
