Split Enclosure 78x48x38 mm

Create a professional 2-piece split enclosure in metric (mm) with a total size of 78 mm length, 48 mm width, and 38 mm total height, split equally into a Top Housing and a Bottom Housing (19 mm height each). Both halves must have a wall thickness of 2.5 mm. All outer vertical corners must feature a smooth 4 mm fillet radius. On the front face of the top housing, add a recessed rectangular cutout measuring 31 mm width, 21 mm height, and 2 mm depth. On the bottom mating rim of the top housing, include four M3 clearance holes (3.2 mm diameter) at the inner corners. In the bottom housing, add four internal screw boss posts at the corners with 2.5 mm pilot holes. On the bottom outer face, add two parallel strap slots, each 8 mm wide and 50 mm long, across the width. On the back face, include an 8 mm circular wire entry hole with a chamfer. Finally, design a tongue-and-groove interlocking lip along the mating edges for a secure fit.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.