Enclosures and housings
Speaker Enclosure
- Bounding box
- 180.0 × 220.0 × 280.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid box with a width of 180mm, a height of 280mm, and a depth of 220mm. Shell the box inward to create a hollow interior with a uniform wall thickness of 15mm. Select the front face. Draw a circle with a diameter of 125mm, centered horizontally and positioned 180mm from the top edge. Extrude-cut this circle entirely through the front wall to create the woofer hole. Draw a circle with a diameter of 75mm, centered horizontally and positioned 65mm from the top edge. Extrude-cut this circle entirely through the front wall to create the tweeter hole. Select the rear face. Draw a rectangle that is 120mm wide and 160mm high, centered horizontally and positioned 30mm from the bottom edge. Extrude-cut this rectangle entirely through the rear wall for the amplifier plate. Draw a circle with a diameter of 45mm, centered horizontally and positioned 50mm from the top edge. Extrude-cut this circle entirely through the rear wall for the bass reflex port.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 180 mm | 100 – 300 |
| Depth | 220 mm | 100 – 300 |
| Height | 280 mm | 150 – 400 |
| Wall Thickness | 15 mm | 5 – 30 |
| Woofer Hole Diameter | 125 mm | 50 – 200 |
| Woofer Distance from Top | 180 mm | 50 – 250 |
| Tweeter Hole Diameter | 75 mm | 30 – 150 |
| Tweeter Distance from Top | 65 mm | 10 – 200 |
| Bass Reflex Port Diameter | 45 mm | 20 – 100 |
| Port Distance from Top | 50 mm | 10 – 250 |
| Amplifier Plate Width | 120 mm | 60 – 200 |
| Amplifier Plate Height | 160 mm | 80 – 250 |
| Amplifier Plate Distance from Bottom | 30 mm | 5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no