Enclosures and housings
Speaker Enclosure
- Bounding box
- 180.0 × 280.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a hollow speaker enclosure with external dimensions: 180mm width, 280mm height, 220mm depth, and a wall thickness of 15mm. Apply a 10mm radius to all vertical external edges to create a soft-cornered aesthetic. Select the front face: - Center a circular cutout for the tweeter, 75mm diameter, recessed 3mm deep. - Center a circular cutout for the woofer, 125mm diameter, recessed 4mm deep, positioned 90mm below the tweeter center. - Cut two circular holes for bass reflex ports, each 45mm diameter, positioned 30mm from the bottom edge and 40mm from the left and right outer edges respectively. Select the right-side face: - Create a circular cutout, 40mm diameter, centered 100mm from the top edge, for the control knob assembly. Select the rear face: - Create a 120mm x 160mm rectangular cutout for the amplifier plate, positioned 30mm from the bottom edge.
Parameters
| Name | Value | Range |
|---|---|---|
| External Width | 180 mm | 100 – 500 |
| External Height | 280 mm | 100 – 500 |
| External Depth | 220 mm | 100 – 500 |
| Wall Thickness | 15 mm | 2 – 30 |
| Corner Radius | 10 mm | 1 – 50 |
| Tweeter Diameter | 75 mm | 20 – 200 |
| Tweeter Recess Depth | 3 mm | 1 – 14 |
| Woofer Diameter | 125 mm | 40 – 300 |
| Woofer Recess Depth | 4 mm | 1 – 14 |
| Woofer Y Offset (below tweeter) | 90 mm | 10 – 200 |
| Port Diameter | 45 mm | 10 – 80 |
| Port Bottom Offset from bottom edge | 30 mm | 5 – 100 |
| Port Side Offset from side edges | 40 mm | 5 – 150 |
| Knob Cutout Diameter | 40 mm | 10 – 80 |
| Knob Y from Top Edge | 100 mm | 10 – 250 |
| Amplifier Plate Width | 120 mm | 20 – 300 |
| Amplifier Plate Height | 160 mm | 20 – 300 |
| Amp Plate Bottom Offset from bottom edge | 30 mm | 5 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no