Enclosures and housings
Speaker Enclosure
- Bounding box
- 180.0 × 280.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
To ensure the cutouts are clean and properly spaced, we'll need to modify the placement of the tweeter and woofer. Here's the updated prompt to generate for TextToCAD: "Create a hollow speaker enclosure with external dimensions: 180mm width, 280mm height, 220mm depth, and a wall thickness of 15mm. Apply a 10mm radius to all vertical external edges. On the front face, draw a circular cutout for the tweeter, 75mm diameter, centered horizontally, positioned 60mm from the top edge. Draw a circular cutout for the woofer, 125mm diameter, centered horizontally, positioned 195mm from the top edge. Cut two circular holes for bass reflex ports, each 45mm diameter, positioned 30mm from the bottom edge and 40mm from the outer edges. On the right-side face, create a circular cutout, 40mm diameter, centered 100mm from the top edge, for the control knob assembly. On the rear face, create a 120mm by 160mm rectangular cutout for the amplifier plate, positioned 30mm from the bottom edge."
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Width | 180 mm | 100 – 300 |
| Enclosure Height | 280 mm | 150 – 400 |
| Enclosure Depth | 220 mm | 100 – 350 |
| Wall Thickness | 15 mm | 5 – 30 |
| Vertical Edge Fillet | 10 mm | 0 – 15 |
| Tweeter Diameter | 75 mm | 20 – 120 |
| Tweeter Distance From Top | 60 mm | 20 – 150 |
| Woofer Diameter | 125 mm | 80 – 180 |
| Woofer Distance From Top | 195 mm | 80 – 270 |
| Bass Port Diameter | 45 mm | 20 – 80 |
| Bass Port From Bottom | 30 mm | 10 – 100 |
| Bass Port From Edge | 40 mm | 10 – 100 |
| Control Knob Diameter | 40 mm | 10 – 80 |
| Control Knob Distance From Top | 100 mm | 10 – 250 |
| Amp Plate Width | 120 mm | 50 – 170 |
| Amp Plate Height | 160 mm | 50 – 270 |
| Amp Plate From Bottom | 30 mm | 5 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no