Enclosures and housings
Speaker & Display Enclosure with Battery-Style Back Cover
- Bounding box
- 80 × 140 × 100 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
A rectangular hollow cuboid box with 8 cm in length( front part of the box for display ) with a hole to fix a 1.8 inch display and a small hole at the lowest bottom just above the ground case to fix the mic , a width of 14 cm on both sides with small rounded holes and a perfect casing inside to fix a 1.5 inch speaker inside the left side of the box , a height of 10 cm; all sides fixed up except the back panel; Back panel to be made specifically a removable one with a design just like that of the battery enclosing cover in back of remotes.
Parameters
| Name | Value | Range |
|---|---|---|
| Front width | 80 mm | 40 – 160 |
| Overall depth | 140 mm | 80 – 250 |
| Height | 100 mm | 40 – 200 |
| Wall thickness | 2.5 mm | 1.2 – 6 |
| Window width | 36 mm | 20 – 60 |
| Window height | 28 mm | 16 – 60 |
| Window centre height | 62 mm | 20 – 95 |
| Microphone hole diameter | 2.5 mm | 1.5 – 5 |
| Microphone hole height | 7 mm | 4 – 20 |
| Side vent hole diameter | 6 mm | 3 – 12 |
| Speaker diameter | 38 mm | 20 – 60 |
| Speaker centre height | 50 mm | 20 – 85 |
| Cover plate thickness | 3.5 mm | 2 – 8 |
| Insert lip length | 5 mm | 2 – 15 |
| Sliding fit clearance | 0.3 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,