Enclosures and housings
Solid Fuel Boiler Plant with Bivalent DHW Tank and Solar Collectors
- Bounding box
- 2000 × 1600 × 2410 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
# PROJECT TOPIC Design the heating installation that will serve a **basement + ground floor + 4-storey building (B+GF+4)**, as well as the boiler plant that will provide the heating medium for space heating and domestic hot water preparation. Domestic hot water will be stored in a **bivalent hot water storage tank**. The building will be heated using **steel panel radiators**, while the pipes used for the distribution system, risers, and connections to the heating units will be made of **copper**. The boiler plant will operate on **solid fuel**. A complete system of **solar thermal collectors** will also be designed to provide supplementary thermal energy for domestic hot water preparation. A **decentralized heat recovery ventilation system** will be installed. The building is located in the locality of: **Sibiu**. The possibility of supplying thermal energy using the following equipment will also be analyzed: **Case 1 –** A boiler plant operating on **natural gas**. **Case 2 –** A **ground-source heat pump (water-to-water)**. For Case 2, the heating of the indoor spaces will be provided by an **underfloor heating system**. The installation shall be designed in accordance with the technical requirements of: - **SR 1907** - **Normative I13** for the design and execution of central heating installations. - **Installation Manual – Heating Installations (I)**.
Parameters
| Name | Value | Range |
|---|---|---|
| Base slab width | 2000 mm | 600 – 4000 |
| Base slab depth | 1600 mm | 600 – 4000 |
| Base slab thickness | 120 mm | 40 – 300 |
| Boiler body width | 700 mm | 200 – 2000 |
| Boiler body depth | 600 mm | 200 – 2000 |
| Boiler body height | 1000 mm | 300 – 2500 |
| Flue pipe diameter | 180 mm | 60 – 500 |
| Flue height above boiler | 1200 mm | 200 – 4000 |
| Tank diameter | 700 mm | 200 – 2000 |
| Cylindrical tank height | 1400 mm | 300 – 3000 |
| Copper pipe diameter | 42 mm | 10 – 150 |
| Collector panel width | 1200 mm | 300 – 3000 |
| Collector slope length | 900 mm | 300 – 2000 |
| Collector tilt angle | 45 deg | 20 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,