3D preview of Solar Filter Base Ring + Retaining Bezel
Loading the interactive model…
Interactive 3D model of Solar Filter Base Ring + Retaining Bezel

Brackets and mounts

Solar Filter Base Ring + Retaining Bezel

1 views
Bounding box
110.8 × 110.8 × 33.6 mm
Engine
Precision B-rep
Parameters
19
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Create a cylindrical telescope solar filter base ring in millimeters using these exact dimensions: 1. Start on the XY plane. Draw two concentric circles centered at the origin with inner diameter 74.0 mm and outer diameter 110.8 mm. Extrude this ring upward in +Z by 5.0 mm to make the front flange. 2. On the top face of the front flange (Z = 5.0 mm), draw two concentric circles centered at the origin with inner diameter 90.8 mm and outer diameter 96.8 mm. Extrude this ring upward in +Z by 25.0 mm to make the rear mounting skirt. 3. Cut three radial through-holes of diameter 2.5 mm through the cylindrical wall of the rear mounting skirt. Place these holes at height Z = 17.5 mm and space them 120 degrees apart around the Z-axis. 4. On the bottom face of the front flange (Z = 0 mm), cut six blind axial holes of diameter 2.5 mm and depth 4.0 mm. Place the hole centers on a pitch circle diameter of 103.8 mm and space them 60 degrees apart around the Z-axis. Create a flat cylindrical solar filter retaining bezel in millimeters using these exact dimensions: 1. Start on the XY plane. Draw two concentric circles centered at the origin with inner diameter 74.0 mm and outer diameter 110.8 mm. 2. Extrude this ring upward in +Z by 3.5 mm. 3. Cut six axial through-holes of diameter 3.2 mm completely through the ring. Place the hole centers on a pitch circle diameter of 103.8 mm and space them 60 degrees apart around the Z-axis.

Parameters

NameValueRange
Front Flange OD110.8 mm80 – 200
Front Flange ID74 mm30 – 105
Front Flange Height5 mm1 – 20
Mounting Skirt OD96.8 mm60 – 110
Mounting Skirt ID90.8 mm50 – 105
Mounting Skirt Height25 mm5 – 60
Radial Hole Diameter2.5 mm1 – 6
Radial Hole Height (from Z=0)17.5 mm6 – 60
Radial Hole Count3 pcs1 – 12
Blind Hole Diameter2.5 mm1 – 5
Blind Hole Depth4 mm0.5 – 4.5
Blind Hole PCD103.8 mm80 – 108
Blind Hole Count6 pcs1 – 12
Bezel OD110.8 mm80 – 200
Bezel ID74 mm30 – 105
Bezel Thickness3.5 mm1 – 12
Bezel Hole Diameter3.2 mm1 – 8
Bezel Hole PCD103.8 mm80 – 108
Bezel Hole Count6 pcs1 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Solar Filter Base Ring + Retaining Bezel - Free CAD Model (STEP, STL) | TextoCAD