Brackets and mounts
Solar Emergency Assembly Point Gate (Exploded)
- Bounding box
- 22600.0 × 880.0 × 2481.5 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create ONE COMPLETE, FULLY ASSEMBLED 3D MECHANICAL CAD MODEL of the "SOLAR-POWERED EMERGENCY ASSEMBLY POINT WITH RFID BASED IDENTIFICATION AND AUTOMATIC HEADCOUNT SYSTEM". CRITICAL REQUIREMENT: I DO NOT WANT SEPARATE UNASSEMBLED PARTS OR INDIVIDUAL 3D OBJECTS AS THE FINAL RESULT. I WANT ALL COMPONENTS PROPERLY CONNECTED, POSITIONED AND ASSEMBLED INTO ONE COMPLETE INDUSTRIAL PRODUCT, EXACTLY FOLLOWING THE UPLOADED REFERENCE IMAGE. OVERALL DIMENSIONS: Height: 2200 mm Width: 1200 mm Depth: 800 mm Entrance width: 1000 mm Entrance height: 2000 mm ASSEMBLY REQUIREMENTS: 1. Assemble four 80 × 80 × 3 mm square hollow steel columns into one rigid structural frame. 2. Connect the top and bottom horizontal steel supports to all four columns. 3. Attach the inclined solar panel mounting structure to the top frame at 15 degrees. 4. Fix the 1200 × 800 × 35 mm solar panel securely onto the roof brackets. 5. Attach the 1200 × 300 mm green EMERGENCY ASSEMBLY POINT signboard to the front top section. 6. Mount the LCD display enclosure directly below the signboard. 7. Mount the RFID reader on the left front vertical column. 8. Install two pairs of IR sensors opposite each other across the entrance, aligned horizontally. 9. Install the red warning beacon on the top-right side. 10. Fix the buzzer enclosure beside the LCD display. 11. Attach the green ENTER panel to the left side and the EXIT panel to the right side. 12. Install the floor plate with two directional arrows at the entrance. 13. Connect all mounting brackets, plates, supports and structural members using realistic mechanical joints and fasteners. 14. Ensure every component is physically attached to the main structure. No floating parts, no disconnected components, no overlapping geometry. FINAL ASSEMBLY: - Generate one complete assembled 3D product. - Keep all individual parts as editable components within the assembly. - Preserve correct component alignment and realistic mechanical clearances. - Show the complete assembly in a professional isometric view. - Also generate front, rear, left side and top orthographic views. EXPORT REQUIREMENTS: - Native editable assembly if supported. - STEP AP214 or AP242 assembly file (.STEP/.STP). - STL of the complete assembled product. - Ensure the STEP file contains the complete assembly, not just one individual component. FINAL CHECK: The final model must look like a fully manufactured industrial emergency assembly gate, matching the uploaded reference design. The entire structure must be assembled as ONE COMPLETE PRODUCT.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 1200 mm | 600 – 3000 |
| Overall Depth | 800 mm | 400 – 2000 |
| Overall Height | 2200 mm | 1200 – 4000 |
| Column Section | 80 mm | 40 – 150 |
| Tube Wall Thickness | 3 mm | 1.5 – 8 |
| Entrance Clear Height | 2000 mm | 1000 – 3600 |
| Exploded Layout Gap | 1800 mm | 500 – 6000 |
| Solar Tilt Angle | 15 deg | 0 – 45 |
| Mount Rail Size | 50 mm | 20 – 120 |
| Panel Width | 1200 mm | 400 – 2400 |
| Panel Depth | 800 mm | 300 – 2000 |
| Panel Thickness | 35 mm | 10 – 80 |
| Signboard Width | 1200 mm | 300 – 2400 |
| Signboard Height | 300 mm | 100 – 800 |
| Signboard Thickness | 20 mm | 5 – 60 |
| LCD Enclosure Width | 500 mm | 150 – 900 |
| LCD Enclosure Height | 250 mm | 100 – 600 |
| LCD Enclosure Depth | 80 mm | 30 – 250 |
| Buzzer Box Width | 150 mm | 60 – 400 |
| Buzzer Box Height | 100 mm | 40 – 300 |
| Buzzer Box Depth | 60 mm | 25 – 200 |
| RFID Reader Width | 120 mm | 60 – 300 |
| RFID Reader Height | 80 mm | 40 – 200 |
| RFID Reader Depth | 30 mm | 15 – 100 |
| RFID Mounting Height | 1200 mm | 300 – 2000 |
| IR Housing Width | 50 mm | 20 – 120 |
| IR Housing Height | 30 mm | 15 – 80 |
| IR Housing Depth | 25 mm | 10 – 70 |
| IR Sensor Height | 1100 mm | 200 – 1900 |
| Beacon Diameter | 80 mm | 40 – 200 |
| Beacon Height | 120 mm | 40 – 300 |
| Side Panel Width | 300 mm | 100 – 800 |
| Side Panel Height | 400 mm | 100 – 1000 |
| Side Panel Thickness | 5 mm | 2 – 20 |
| Floor Plate Width | 800 mm | 300 – 2000 |
| Floor Plate Depth | 600 mm | 200 – 1600 |
| Floor Plate Thickness | 5 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o