Enclosures and housings
Solar Air Heater Duct Assembly
- Bounding box
- 1425.0 × 538.0 × 327.3 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
6. Complete consolidated dimension sheet This is the table I recommend using when preparing your CAD model in SolidWorks, AutoCAD or ANSYS. No. Component Dimension Unit 1 Total duct length 1425 mm 2 Duct width 500 mm 3 Duct height 25 mm 4 Inlet length 550 mm 5 Test section length 600 mm 6 Outlet length 275 mm 7 Absorber length 600 mm 8 Absorber width 500 mm 9 Absorber thickness 1.2 mm 10 Roughness GI sheet thickness 1 mm 11 Reflector length 600 mm 12 Reflector height 300 mm 13 Reflector thickness 0.3 mm 14 Reflector inclination 30 degrees 15 Copper wire diameter 2 mm 16 Roughness pitch 20 mm 17 Roughness attack angle 60 degrees 18 Relative roughness pitch 10 Dimensionless 19 Relative roughness height 0.047 Dimensionless 20 Relative attack angle 0.667 Dimensionless 21 Sidewall thickness 18 mm 22 Hydraulic diameter (calculated) 47.619 mm 23 Cross-sectional area (calculated) 12500 mm² 24 Calculated roughness height 2.238 mm 25 Roughness height from pitch/wire 2 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Duct Width (internal) | 500 mm | 100 – 1000 |
| Duct Height (internal) | 25 mm | 8 – 200 |
| GI Sheet Thickness | 1 mm | 0.4 – 4 |
| Inlet Length | 550 mm | 50 – 1500 |
| Test Section Length | 600 mm | 100 – 1500 |
| Outlet Length | 275 mm | 50 – 1500 |
| Sidewall Thickness | 18 mm | 2 – 50 |
| Absorber Length | 600 mm | 50 – 1500 |
| Absorber Width | 500 mm | 50 – 1000 |
| Absorber Thickness | 1.2 mm | 0.3 – 10 |
| Reflector Length | 600 mm | 100 – 1200 |
| Reflector Height | 300 mm | 50 – 600 |
| Reflector Thickness | 0.3 mm | 0.2 – 5 |
| Reflector Inclination | 30 deg | 0 – 85 |
| Copper Wire Diameter | 2 mm | 0.5 – 6 |
| Roughness Pitch | 20 mm | 5 – 100 |
| Attack Angle | 60 deg | 10 – 90 |
| Roughness Height (e) | 2.24 mm | 1 – 10 |
| Number of Wires | 15 count | 1 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no