Enclosures and housings
Soap Embossing Stamp
- Bounding box
- 60 × 60 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional 3D printable soap embossing stamp, 60 x 60 mm. The stamp must have a square flat backing plate, 15 mm thick. On the bottom contact face, create a raised embossing design, 5 mm high, featuring two traditional Christmas candy canes crossing each other to form a symmetrical heart. Include: A continuous raised outer contour following the candy cane shapes. Raised diagonal stripes along both candy canes. Clear separation between each stripe. Rounded edges and 20-degree tapered sidewalls. Minimum raised line width of 1.5 mm. All raised details must be connected to the backing plate and create recessed impressions in soap. The model must be one solid, watertight, manifold mesh, suitable for PETG FDM printing. Exact overall backing dimensions: 60 x 60 x 15 mm. Export as STL in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 60 mm | 40 – 200 |
| Depth | 60 mm | 40 – 200 |
| Backing thickness | 15 mm | 10 – 30 |
| Emboss height | 5 mm | 3 – 10 |
| Sidewall taper | 20 deg | 5 – 45 |
| Minimum raised line width | 1.5 mm | 1.5 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,