3D preview of Snap-On Clip Cover (40×47, left rolled flange, 2 right tabs)
Loading the interactive model…
Interactive 3D model of Snap-On Clip Cover (40×47, left rolled flange, 2 right tabs)

Brackets and mounts

Snap-On Clip Cover (40×47, left rolled flange, 2 right tabs)

6 views
Bounding box
44.0 × 47.0 × 15.0 mm
Engine
Precision B-rep
Parameters
15
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

English prompt for TextoCAD Create a 3D-printable plastic clip cover as a watertight solid STL-ready model, using millimeters. Main geometry - Overall front face size: 40 mm wide × 47 mm high - Front panel thickness: 2 mm - The left side is not straight. It has a curved arc / rolled flange that wraps from the front face down toward the underside. - Left curved side radius: 11.5 mm Right-side clip tabs - Add 2 snap tabs on the right edge - Tab projection outward: 4 mm - Tab height: 4 mm - Vertical spacing between the 2 tabs: 26 mm - Tabs should be aligned on the right side and shaped for simple snap-fit retention Underside / interior - Create an underside recessed cavity - Inner pocket depth: 13 mm - Wall thickness: 1 mm - Add interior reinforcing ribs with thickness: 1 mm - The underside should include: - an outer inner wall following the rectangular shape - a curved inner wall matching the left curved flange - horizontal and vertical reinforcing ribs similar to a small plastic cover structure - simple compartment-like rib layout for strength Shape details - Front face is a rounded rectangle with slightly softened corners - Exterior face can be smooth; carbon-fiber texture is not required - The part should look like a small plastic enclosure cover / snap-on cap - Preserve the left curved flange as a major feature - Preserve the two right-side tabs as major features Modeling intent - Generate a single solid body - Ensure the model is manifold / watertight - Suitable for export as STL for 3D printing - Keep the geometry simple and printable - Add small edge fillets only if needed, but do not change the main dimensions Important interpretation - Treat 2 mm as the front panel thickness - Treat 13 mm as the underside cavity / body depth - Therefore the model is a cover with a front plate and a deeper underside structure, not a flat 2 mm sheet

Parameters

NameValueRange
Overall Width40 mm20 – 100
Overall Height47 mm20 – 120
Front Panel Thickness2 mm1.5 – 5
Underside Cavity Depth13 mm12 – 40
Wall Thickness1 mm0.6 – 2.5
Left Rolled Flange Radius11.5 mm4 – 11.5
Rib Thickness1 mm0.6 – 3
Transverse Ribs2 count0 – 5
Longitudinal Ribs1 count0 – 3
Tab Projection4 mm1 – 10
Tab Height4 mm2 – 10
Tab Width (along height)8 mm3 – 20
Tab Vertical Spacing26 mm5 – 40
Tab Centre Height Above Rim4 mm2 – 12
Edge Softening Radius0.8 mm0.2 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Snap-On Clip Cover (40×47, left rolled flange, 2 right tabs) - Free CAD Model (STEP, STL) | TextoCAD