Enclosures and housings
Snap-Lock Electronics Enclosure (Body + Lid)
- Bounding box
- 320.0 × 155.6 × 98.2 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional, 3D-printable black electronics enclosure. - **Dimensions:** 150 mm wide × 150 mm deep × 100 mm high. - Hollow interior with 2.5 mm thick walls. - Include a separate, removable lid. - The lid must fit securely without sliding sideways. - Add a small, easy-to-open snap-lock mechanism to attach the lid to the box. - The lid must be removable without tools. - Use a clean, modern, futuristic technical design. - Make the box and lid separate 3D-printable parts. - Include suitable tolerances for FDM 3D printing. **Important:** Prioritize precise dimensions, a reliable locking mechanism and practical functionality over decorative details.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width | 150 mm | 60 – 300 |
| Outer Depth | 150 mm | 60 – 300 |
| Body Height | 96 mm | 30 – 250 |
| Wall Thickness | 2.5 mm | 1.5 – 6 |
| Floor Thickness | 2.5 mm | 1.5 – 6 |
| Outer Corner Radius | 6 mm | 0 – 20 |
| Boss Diameter | 5 mm | 3 – 12 |
| Boss Height | 6 mm | 3 – 20 |
| Boss Pilot Hole (M3) | 2.5 mm | 1.5 – 5 |
| Boss Offset From Centre | 67 mm | 30 – 72 |
| Latch Slot Width | 12 mm | 6 – 30 |
| Latch Slot Height | 4 mm | 2 – 10 |
| Slot Below Top Rim | 4 mm | 0 – 25 |
| 45-deg Lead-in Size | 0.8 mm | 0 – 1.2 |
| Lid Plate Thickness | 4 mm | 2 – 10 |
| Locating Lip Height | 6 mm | 2 – 15 |
| Locating Lip Thickness | 2.5 mm | 1.2 – 6 |
| FDM Fit Clearance | 0.3 mm | 0.05 – 1 |
| Snap Tab Width | 18 mm | 6 – 40 |
| Snap Tab Thickness | 1.5 mm | 0.8 – 3 |
| Snap Tab Height | 8 mm | 4 – 25 |
| Tab-to-Wall Clearance | 0.3 mm | 0.1 – 1 |
| Hook Engagement Depth | 0.8 mm | 0.3 – 2 |
| Thumb Release Width | 8 mm | 3 – 20 |
| Thumb Release Height | 3 mm | 1 – 10 |
| Thumb Release Projection | 1 mm | 0.3 – 3 |
| Exploded Layout Gap | 20 mm | 5 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,