Enclosures and housings
Snap-Fit Tracker Base + Detachable Power Bank
- Bounding box
- 80.0 × 60.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 14, 2026
Download
Free to download and use. See the terms.
The prompt
A two-part mechanical assembly for an electronic monitoring device, consisting of a base tracking unit and a detachable power bank module. Part 1: The Base Unit. A rectangular enclosure, 80mm in length, 40mm in width, and 25mm in depth. Both the front and back surfaces are completely flat, with no curvature. Extending outward from the left and right lateral sides of the enclosure are two strap attachment lugs (ears). Each lug is 25mm long, running parallel to the 80mm edge, and extends 10mm outward from the side wall. On the left and right lateral sides of the main body's front face, adjacent to the lugs, there are two symmetrical locking recesses (slots) designed to accept snap-fit hooks. Part 2: The Detachable Power Bank. A rectangular block, 80mm in length, 40mm in width, and 15mm in depth. Its back surface is perfectly flat to mate smoothly with the flat front surface of the base unit. Integrated into the left and right lateral sides are flexible cantilever snap-fit latches. Each latch features an inward-facing hook at the tip to engage with the corresponding recesses on the base unit, and an external textured push-button area. Mechanism: A side-release snap-fit system. Pressing the two external side buttons simultaneously flexes the cantilever arms outward, releasing the hooks from the base unit's recesses and allowing the power bank to be removed.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length (X) | 80 mm | 40 – 160 |
| Base Width (Y) | 40 mm | 20 – 100 |
| Base Depth (Z) | 25 mm | 10 – 60 |
| Side/End Wall Thickness | 5 mm | 2 – 15 |
| Front Wall Thickness | 8 mm | 2 – 20 |
| Strap Lug Length | 25 mm | 5 – 60 |
| Lug Outward Extension | 10 mm | 2 – 30 |
| Lug Thickness | 5 mm | 1 – 15 |
| Strap Slot Length | 14 mm | 2 – 40 |
| Strap Slot Width | 4 mm | 1 – 12 |
| Recess Length (X) | 30 mm | 5 – 70 |
| Recess Depth (Y) | 3 mm | 1 – 10 |
| Recess Height (Z) | 8 mm | 2 – 20 |
| Recess Bottom Height | 3 mm | 0 – 20 |
| Power Bank Length (X) | 80 mm | 20 – 160 |
| Power Bank Width (Y) | 40 mm | 20 – 100 |
| Power Bank Depth (Z) | 15 mm | 5 – 50 |
| Latch Arm Width (X) | 24 mm | 5 – 70 |
| Latch Arm Thickness (Y) | 3 mm | 1 – 10 |
| Cantilever Arm Length (Z) | 22 mm | 5 – 60 |
| Latch Root Height (Z) | 3.5 mm | 1 – 10 |
| Arm to Base Clearance | 0.25 mm | 0.05 – 2 |
| Hook Inward Depth (Y) | 2.5 mm | 0.5 – 8 |
| Hook Height (Z) | 5 mm | 1 – 15 |
| Hook Bottom Height | 4 mm | 0 – 20 |
| Push Button Length (Z) | 10 mm | 2 – 40 |
| Push Button Width (X) | 16 mm | 2 – 60 |
| Push Button Protrusion | 1 mm | 0.2 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no