Enclosures and housings
SmartTap V1-D Top Cap with Inlet Connector
- Bounding box
- 87 × 87 × 38 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create COMPONENT 02: TOP CAP WITH CENTRAL WATER INLET CONNECTOR for SMARTTAP V1-D. Use millimeters. REFERENCE HOUSING: - Housing internal diameter: 75 mm. - Housing external diameter: 81 mm. - Housing wall thickness: 3 mm. TOP CAP DIMENSIONS: 1. Circular cap flange: - Outer diameter: 87 mm. - Thickness: 6 mm. 2. Inner insertion spigot: - Outer diameter: 74.6 mm. - Insertion length: 12 mm. - Concentric with the cap. 3. Central inlet connector boss: - Outer diameter: 25 mm. - Height: 20 mm. - Central water passage diameter: 12 mm. 4. Water passage: - Continuous opening through the entire cap and inlet boss. - No blind hole. 5. Sealing arrangement: - Provide a flat circular O-ring sealing land. - Keep sufficient material around the insertion spigot. - Do not finalize O-ring groove dimensions until the O-ring size is confirmed. 6. Mechanical details: - Add small edge fillets. - Maintain concentric geometry. - Provide a removable cap design. - No permanent bonding. - No unnecessary decorative features. IMPORTANT: - This is a separate component from the main housing. - Do not generate the housing again. - Do not close the water passage. - Do not add filter media or probes. - Keep all dimensions editable. - Generate one clean watertight solid suitable for plastic 3D printing. Show an isometric view and a sectional view.
Parameters
| Name | Value | Range |
|---|---|---|
| Flange outer diameter | 87 mm | 60 – 120 |
| Flange thickness | 6 mm | 3 – 15 |
| Spigot OD, 0.4 mm clearance to Ø75 bore | 74.6 mm | 40 – 110 |
| Spigot insertion length | 12 mm | 4 – 30 |
| Boss outer diameter | 25 mm | 12 – 50 |
| Boss height above the flange top | 20 mm | 6 – 60 |
| Central through-bore diameter | 12 mm | 4 – 30 |
| Concave fillet radius | 1.5 mm | 0.5 – 4 |
| Edge chamfer | 1 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
