Enclosures and housings
Smartphone Stand (Sketch-Extrude-Fillet)
- Bounding box
- 80.0 × 100.0 × 112.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing smartphone stand and generate it using explicit, separate, ordered CAD modelling operations. I specifically need the following operations to appear as separate nodes in the left Feature Tree: 1. **Sketch:** Create a fully dimensioned 2D side-profile sketch on the YZ plane, including the base, inclined back support and front retaining lip. 2. **Extrude:** Extrude the closed sketch profile symmetrically by 80 mm to create the solid body. 3. **Fillet:** Apply a 2 mm fillet to suitable external edges. Keep the overall dimensions approximately 80 × 100 × 112 mm. Important: - Do not generate the shape using only primitive solids or a mesh. - Preserve the actual sketch and modelling operations. - Make the Sketch, Extrude and Fillet individually visible in the Feature Tree. - Maintain a single connected solid body. - Keep all dimensions in millimetres. My assignment requires proof of a sketch-based feature and a fillet or chamfer operation.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 80 mm | 40 – 160 |
| Base Length | 100 mm | 60 – 200 |
| Total Height | 112 mm | 60 – 220 |
| Base Thickness | 12 mm | 4 – 30 |
| Front Lip Height | 12 mm | 3 – 40 |
| Front Lip Depth | 15 mm | 4 – 50 |
| Back Support Thickness | 8 mm | 3 – 25 |
| Support Setback From Rear | 30 mm | 5 – 80 |
| Back Lean Angle (from vertical) | 10 deg | 0 – 35 |
| Edge Fillet Radius | 2 mm | 0 – 6 |
| Cable Slot Width | 14 mm | 4 – 40 |
| Cable Slot Length | 20 mm | 5 – 60 |
| Cable Slot Offset From Lip | 8 mm | 1 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,