Enclosures and housings
Smartphone Stand
- Bounding box
- 80 × 90 × 100 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple 3D printable smartphone stand. Dimensions: - Width: 80 mm - Depth: 90 mm - Height: 100 mm - Back support angle: 70 degrees The design should include a flat rectangular base, an angled back support and a small front stopper to hold the phone securely. Add a small opening for a charging cable. Use simple solid geometric shapes and ensure the model is suitable for FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 80 mm | 40 – 160 |
| Overall depth | 90 mm | 50 – 160 |
| Overall height | 100 mm | 60 – 180 |
| Back support angle from base | 70 deg | 45 – 85 |
| Base thickness | 6 mm | 3 – 12 |
| Back support thickness | 6 mm | 3 – 15 |
| Back support width | 70 mm | 20 – 160 |
| Front stopper height above base | 18 mm | 5 – 40 |
| Front stopper thickness | 6 mm | 2 – 12 |
| Front stopper width | 70 mm | 20 – 160 |
| Stopper inset from front edge | 6 mm | 0 – 20 |
| Phone thickness allowance | 10 mm | 6 – 20 |
| Sliding clearance around phone | 0.5 mm | 0.2 – 2 |
| Charging cable hole width | 14 mm | 6 – 30 |
| Charging cable hole length | 8 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
