Jigs and fixtures
Smart Glasses Frame
- Bounding box
- 163.0 × 48.0 × 153.0 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Step 1 (Base Face Extrusion): Select the Front Plane (XY), draw the outer bounding profile at 144.00 mm Width × 48.00 mm Height, and execute a Boss-Extrude forward to a thickness of 14.00 mm.Step 2 (The 60/40 Split & Optical Angle): Create a horizontal reference line exactly 19.20 mm up from the bottom of the lens profile to lock in the 40% HUD area. Select the Right Plane (YZ) and use the Cut-Extrude tool to slice the interior shelf at an angle of exactly 45.00°.Step 3 (Electronics Packaging Cavities): Select the top face of the frame brow and perform a vertical Cut-Extrude down by 18.40 mm to create the 26.70 mm × 7.70 mm pocket for the Sony Micro-OLED. Cut the 5.50 mm square IMU pocket down by 6.00 mm at the exact center of the bridge.Step 4 (Prescription Lens Track & Wire Runways): Route a continuous 2.50 mm wide × 2.00 mm deep internal wire channel through the brow structure. Create a reference plane offset 1.50 mm behind the prism face and cut the circular 1.20 mm wide × 0.80 mm deep Rx insert groove right into the inner rim walls.Step 5 (Balanced Battery Tails): Sweep the temple arms to a length of 152.00 mm on the side plane, and pocket-cut the internal 12.50 mm × 38.00 mm × 5.50 mm capsule slot directly into the ear tips.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Width | 144 mm | 100 – 200 |
| Frame Height | 48 mm | 30 – 80 |
| Frame Thickness | 14 mm | 5 – 30 |
| HUD Line Height from Bottom | 19.2 mm | 5 – 40 |
| Shelf Cut Angle | 45 deg | 10 – 80 |
| OLED Pocket Width | 26.7 mm | 10 – 60 |
| OLED Pocket Z-Depth | 7.7 mm | 2 – 30 |
| OLED Pocket Cut Depth (Y) | 18.4 mm | 5 – 40 |
| IMU Pocket Size | 5.5 mm | 2 – 15 |
| IMU Pocket Depth | 6 mm | 1 – 20 |
| Wire Channel Width | 2.5 mm | 0.5 – 10 |
| Wire Channel Depth | 2 mm | 0.5 – 10 |
| Rx Groove Width | 1.2 mm | 0.2 – 5 |
| Rx Groove Depth | 0.8 mm | 0.2 – 5 |
| Rx Groove Diameter | 50 mm | 20 – 120 |
| Left Lens Center X | 36 mm | 10 – 100 |
| Right Lens Center X | 108 mm | 40 – 180 |
| Lens Center Y | 24 mm | 5 – 80 |
| Temple Length | 152 mm | 80 – 250 |
| Capsule Slot Width | 12.5 mm | 4 – 30 |
| Capsule Slot Length | 38 mm | 10 – 70 |
| Capsule Slot Depth | 5.5 mm | 1 – 20 |
| Temple Arm Width | 8 mm | 3 – 20 |
| Temple Arm Height | 10 mm | 3 – 25 |
| Ear Tip Width | 15 mm | 5 – 30 |
| Ear Tip Height | 12 mm | 5 – 30 |
| Ear Tip Length | 38 mm | 10 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl