Brackets and mounts
Small X-Frame Quadcopter Main Body
- Bounding box
- 70.0 × 70.0 × 7.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
3D CAD Design Specification: Small X-Frame Quadcopter Main Body 1. General Design Create a compact, symmetrical X-shaped quadcopter frame as one continuous solid structure. The design must consist of: - One central rectangular frame - Four diagonal arms - Four circular motor mounts Do not add any reinforcement, gusset, decorative feature, or unnecessary geometry. 2. Overall Dimensions - Overall X dimension: 70 mm. - Overall Y dimension: 70 mm. - Maximum dimensional tolerance: ±1 mm. - Main body thickness: 3 mm. - Center the design around the origin (0, 0). 3. Central Frame - Shape: Rectangle. - Inner opening: 40 × 30 mm. - Longitudinal side rails: 3 mm wide. - Transverse end rails: 2 mm wide. - Outer dimensions: 44 × 36 mm. - Thickness: 3 mm. - Keep the central opening completely unobstructed. 4. Four Diagonal Arms - Arrange four arms symmetrically in an X configuration. - Adjacent arms must be 90° apart. - Arm width: 2 mm. - Arm thickness: 3 mm. - Straight-side lengths: 9.26 mm and 11.26 mm. - These dimensions describe the complete straight sides of the arm sections. The arms must connect directly and continuously to the central frame and motor mounts. Use simple, straight-sided arm geometry. Do not add curved reinforcements or extra structural extensions. 5. Four Circular Motor Mounts Create one circular motor mount at the end of each arm. Dimensions: - Outer diameter: 11 mm. - Inner through-hole diameter: 7 mm. - Radial wall thickness: 2 mm. - Main body thickness: 3 mm. - Additional upward height: 4 mm. - Total height: 7 mm. The bottom of each motor mount must align with the bottom of the main body. The additional 4 mm must extend upward only. Keep all four mounting holes completely open through the full 7 mm height. 6. Structural Requirements - The central frame, four arms, and four motor mounts must form one continuous solid. - No disconnected components. - No unintended gaps or overlapping internal faces. - No self-intersections or non-manifold geometry. - Preserve the central opening and all four motor holes. - Do not create any reinforcement structures. 7. Final Output Generate: - Complete editable 3D CAD model. - Top view. - Bottom view. - Front view. - Side view. - Isometric view. - Dimensioned engineering drawing. - Final STL file. 8. Final Instructions Follow all specified dimensions precisely. Do not independently redesign, simplify, or add unrequested features. If any dimensions cannot be satisfied simultaneously, report the exact geometric conflict instead of silently changing the dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall X and Y Span | 70 mm | 68 – 72 |
| Frame and Arm Thickness | 3 mm | 2 – 4 |
| Central Opening X | 40 mm | 38 – 42 |
| Central Opening Y | 30 mm | 28 – 32 |
| Longitudinal Side Rail Width | 3 mm | 2 – 4 |
| Transverse End Rail Width | 2 mm | 1.5 – 3 |
| Arm Width | 2 mm | 1.5 – 2.5 |
| Complete Short Straight Side | 9.26 mm | 8 – 11 |
| Complete Long Straight Side | 11.26 mm | 10 – 13 |
| Arm Offset from Diagonal | 1.5 mm | 0 – 2 |
| Motor Mount Outer Diameter | 11 mm | 10 – 12 |
| Motor Mount Through-Hole Diameter | 7 mm | 6 – 8 |
| Motor Mount Height Above Main Body | 4 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
