9.212.116.6
Loading the interactive model…
Interactive 3D model of Sloped arm with pusher pin

Mechanical parts

Sloped arm with pusher pin

1 views
Bounding box
12.1 × 9.2 × 16.6 mm
Engine
3D Printing B-rep
Parameters
11
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

starting at X = 1.1 mm, with a length of 11.1 mm, width of 8.2 mm (centered on Y = 0), and height of 9.5 mm. Cut a sloped top surface on this arm so the inner edge at X = 1.1 mm has a height of 7.3 mm and the outer edge at X = 12.2 mm has a height of 9.5 mm. Add a 0.6 mm fillet to the top and vertical edges of the arm. Third, on the bottom face of the skirt (Z = -1.2 mm), extrude a cylindrical pusher pin at X = 7.2 mm, Y = 0 with a diameter of 4.2 mm and downward height of 6.0 mm.

Parameters

NameValueRange
Arm start X1.1 mm0.5 – 10
Arm length11.1 mm5 – 30
Arm width8.2 mm2 – 20
Inner edge height7.3 mm2 – 20
Outer edge height9.5 mm2 – 20
Fillet radius0.6 mm0.2 – 2
Skirt bottom Z-1.2 mm-5 – 0
Skirt margin0.5 mm0 – 2
Pusher pin X7.2 mm0 – 20
Pusher pin diameter4.2 mm1 – 8
Pusher pin height6 mm0.5 – 15

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Sloped arm with pusher pin - Free CAD Model (STEP, STL) | TextoCAD