Enclosures and housings
Sliding dovetail lid for roll cartridge
- Bounding box
- 158.8 × 28.4 × 1.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Units: mm. New separate part: the sliding dovetail lid for that cartridge, printed flat. Variables: roll_d = 24, cells = 6, divider = 1.2, lid_t = 2.0, fit = 0.3, cell_d = roll_d + 2 * lid_t + 1, stack_h = cells * (roll_d + 2 + divider) + divider. Plate thickness t = lid_t - 0.1 (1.9). Bottom face width = cell_d - 2 * fit (28.4). Chamfer both long edges at 45 degrees through the full thickness, so the top face is 2 * t narrower (24.6). Length = stack_h - divider - 4.4 (158.8). On the top face near one end, cut 3 grip grooves across the width, stopping 2 mm from each edge: 1.2 mm wide, 0.5 mm deep, centered , 8 and 11 mm from that end.
Parameters
| Name | Value | Range |
|---|---|---|
| Roll diameter | 24 mm | 10 – 60 |
| Number of cells | 6 mm | 1 – 12 |
| Divider thickness | 1.2 mm | 0.8 – 4 |
| Lid slot depth | 2 mm | 1.4 – 5 |
| Sliding clearance per side | 0.3 mm | 0.1 – 0.6 |
| Thickness relief below slot depth | 0.1 mm | 0 – 0.4 |
| Length relief | 4.4 mm | 0 – 20 |
| Number of grooves | 3 mm | 0 – 8 |
| First groove centre from end | 5 mm | 2 – 30 |
| Groove spacing | 3 mm | 2 – 10 |
| Groove width | 1.2 mm | 0.6 – 3 |
| Groove depth | 0.5 mm | 0.2 – 1.2 |
| Groove stop from top-face edge | 2 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
