Enclosures and housings
Slanted Front Block with Prongs
- Bounding box
- 250 × 140 × 107.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Units mm. Origin at front-bottom-centre. X = left/right, Y = depth (front Y=0, back Y=140), Z = up. Create a solid block 250 (X) x 140 (Y) x 55 (Z), centred on X, with 8mm rounded vertical corners. Cut the front face so it leans back 15° from vertical: bottom front edge stays at Y=0, top front edge moves to Y=14.7. On the top face (Z=55) add 4 prongs, each 12 x 12mm and 55mm tall, leaning back 10°, with 3mm rounded tops. Prong centres at Y=40 and X = -106, -58, 58, 106. Cut a square hole in the top face for a post: 20.3 x 20.3mm, 15.5mm deep, spanning X -10.15 to 10.15 and Y 99.85 to 120.15. Underside: four round recesses 10.5mm diameter x 1.2mm deep at X=±115, Y=10 and Y=130. One round pocket 41mm diameter x 10mm deep at X=-50, Y=84.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width X | 250 mm | 50 – 400 |
| Overall depth Y | 140 mm | 40 – 300 |
| Overall height Z | 55 mm | 10 – 150 |
| Vertical corner radius | 8 mm | 0.5 – 25 |
| Front face lean-back angle | 15 deg | 0 – 45 |
| Prong square section | 12 mm | 4 – 30 |
| Prong length | 55 mm | 5 – 150 |
| Prong lean-back angle | 10 deg | 0 – 45 |
| Prong top rounding | 3 mm | 0.5 – 6 |
| Prong centre Y | 40 mm | 5 – 135 |
| Outer prong |X| | 106 mm | 10 – 120 |
| Inner prong |X| | 58 mm | 5 – 120 |
| Prong embed into block | 2 mm | 0.5 – 5 |
| Post hole square | 20.3 mm | 4 – 80 |
| Post hole depth | 15.5 mm | 2 – 45 |
| Post hole centre Y | 110 mm | 10 – 138 |
| Foot recess diameter | 10.5 mm | 3 – 30 |
| Foot recess depth | 1.2 mm | 0.3 – 5 |
| Foot recess |X| | 115 mm | 10 – 122 |
| Front foot recess Y | 10 mm | 2 – 70 |
| Rear foot recess Y | 130 mm | 70 – 138 |
| Underside pocket diameter | 41 mm | 5 – 110 |
| Underside pocket depth | 10 mm | 1 – 45 |
| Underside pocket centre X | -50 mm | -120 – 120 |
| Underside pocket centre Y | 84 mm | 5 – 138 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
