Enclosures and housings
SkyLink Wearable Bracelet and Quadcopter Drone Assembly
- Bounding box
- 220.6 × 220.6 × 260.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Project: SkyLink - A Cellular-Enabled Bracelet-Drone Location Sharing System Overview: SkyLink is a wearable device and drone system that enables users to share their location with a drone using cellular connectivity, allowing the drone to navigate to the user's location. Components: 1. Wearable Device (Bracelet): - Microcontroller (e.g., ESP32) - GPS module (e.g., NEO-6M) - Cellular module (e.g., SIM800L) - SIM card - Battery and power management 2. Drone: - Flight controller (e.g., Pixhawk, ArduPilot) - GPS module (e.g., u-blox, GPSd) - Cellular module (e.g., SIM800L) - SIM card - Autopilot system (e.g., PX4, ArduPilot) 3. Communication Protocol: - Cellular network (2G/3G/4G) for communication between the bracelet and drone Working Steps: 1. Bracelet: - Acquires GPS location (longitude, latitude) - Sends location data to the drone via cellular network (HTTP/HTTPS request) 2. Drone: - Receives location data from the bracelet via cellular network - Sets the received location as a waypoint - Autopilot system navigates the drone to the waypoint 3. Drone Navigation: - Uses GPS and autopilot system to reach the destination - Lands near the user's location Technical Requirements: 1. Cellular Connectivity: 2G/3G/4G coverage 2. Location Accuracy: 5-10 meters (16-33 feet) 3. Drone Flight Time: 15-30 minutes 4. Bracelet Battery Life: 1-3 days 5. SIM Card: Standard SIM card (micro/nano)
Parameters
| Name | Value | Range |
|---|---|---|
| Bracelet housing length | 60 mm | 40 – 80 |
| Bracelet housing width | 40 mm | 30 – 60 |
| Bracelet housing height | 15 mm | 10 – 30 |
| Bracelet wall thickness | 3 mm | 1.5 – 5 |
| Bracelet corner radius | 5 mm | 1 – 8 |
| Drone body length | 100 mm | 60 – 150 |
| Drone body width | 80 mm | 50 – 120 |
| Drone body height | 30 mm | 15 – 50 |
| Drone body corner radius | 8 mm | 2 – 15 |
| Arm length (hub to motor) | 90 mm | 50 – 150 |
| Arm width | 12 mm | 6 – 20 |
| Arm height | 8 mm | 4 – 15 |
| Motor diameter | 22 mm | 10 – 35 |
| Motor height | 20 mm | 8 – 30 |
| Propeller length | 120 mm | 60 – 180 |
| Propeller width | 12 mm | 6 – 20 |
| Propeller height | 6 mm | 2 – 10 |
| Landing leg height | 30 mm | 10 – 50 |
| Landing leg width | 10 mm | 5 – 15 |
| Drone hover gap above bracelet | 200 mm | 50 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no