Enclosures and housings
Skeleton Coin Sorter with Guided Sorting Rail
- Bounding box
- 220.6 × 160.0 × 207.5 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the design: Remove the large outer cabinet/box entirely to save filament and printing material. Keep only the skeleton frame supporting the internal components: the top entry slot, the inclined sorting rail, and the vertical storage tubes. Upgrade the inclined ramp into a fully enclosed or side-guided track (guide rail channel) so coins roll in a single fixed path directly over the sorting holes without falling off to the sides. Maintain the existing high-capacity storage tubes underneath.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame width | 220 mm | 120 – 350 |
| Frame depth | 160 mm | 80 – 300 |
| Frame height | 220 mm | 150 – 350 |
| Wall / guide thickness | 4 mm | 2 – 6 |
| Top entry slot width | 40 mm | 20 – 60 |
| Top entry slot depth | 8 mm | 3 – 20 |
| Front opening width | 80 mm | 20 – 150 |
| Front opening height | 30 mm | 5 – 80 |
| Base shelf thickness | 8 mm | 4 – 20 |
| Tube clearance below ramp | 2 mm | 0.5 – 5 |
| Storage tube height | 70 mm | 30 – 120 |
| Ramp length | 200 mm | 100 – 300 |
| Ramp angle | 30 mm | 15 – 45 |
| Ramp width | 40 mm | 30 – 60 |
| Ramp floor thickness | 4 mm | 2 – 10 |
| Guide rail height | 20 mm | 5 – 40 |
| Sorting slot 1 diameter | 19 mm | 15 – 35 |
| Sorting slot 2 diameter | 21 mm | 15 – 35 |
| Sorting slot 3 diameter | 23 mm | 15 – 35 |
| Sorting slot 4 diameter | 24.3 mm | 15 – 35 |
| Sorting slot 5 diameter | 26 mm | 15 – 35 |
| Sorting slot 6 diameter | 26.8 mm | 15 – 35 |
| Sorting slot 7 diameter | 31 mm | 15 – 35 |
| Tube 1 inner diameter | 20 mm | 18 – 35 |
| Tube 2 inner diameter | 22 mm | 18 – 35 |
| Tube 3 inner diameter | 24 mm | 18 – 35 |
| Tube 4 inner diameter | 25.3 mm | 18 – 35 |
| Tube 5 inner diameter | 27 mm | 18 – 35 |
| Tube 6 inner diameter | 27.8 mm | 18 – 35 |
| Tube 7 inner diameter | 32 mm | 18 – 35 |
| Tube wall thickness | 2 mm | 1 – 5 |
| Tube bottom thickness | 3 mm | 1 – 8 |
| Level slot width | 8 mm | 4 – 20 |
| Level slot height | 40 mm | 10 – 80 |
| Pedestal radius | 12 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no