Enclosures and housings
Six Cigarette Pocket Case
- Bounding box
- 201.2 × 65.3 × 13.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 3D-printable pocket case that holds exactly six 中南海 Black Eight (典8) cigarettes. Use 84 mm for the cigarette length and 8 mm as the estimated diameter. - Arrange six individual slots side by side in a single layer. Make each slot 86 mm long, 8.8 mm wide and 8.8 mm deep, measured internally with the lid closed. - Use 2 mm outer walls and a 2 mm base, with 1.6 mm dividers between the slots. Bring the divider tops close to the underside of the closed lid so there’s no room for a seventh cigarette above them. - Add a small push-out opening underneath each slot near the filter end so a cigarette can be lifted out with a fingertip. - Make a separate sliding lid with a thumb tab and an end stop. Use 0.25 mm clearance per side between the lid and its rails. - Make the cigarette length, estimated diameter and rail clearance editable. Design the base and lid as two separate parts that can each be exported as an STL in millimetres for Bambu Studio.
Parameters
| Name | Value | Range |
|---|---|---|
| Cigarette length | 84 mm | 60 – 100 |
| Estimated cigarette diameter | 8 mm | 5 – 12 |
| Slot internal length | 86 mm | 60 – 110 |
| Slot internal width | 8.8 mm | 6 – 14 |
| Slot internal depth, lid closed | 8.8 mm | 6 – 20 |
| Outer wall thickness | 2 mm | 1 – 4 |
| Floor thickness | 2 mm | 1 – 4 |
| Divider thickness | 1.6 mm | 0.8 – 3 |
| Push-out window length | 12 mm | 4 – 20 |
| Push-out window width | 5 mm | 2 – 10 |
| Lid rail height above wall top | 2.5 mm | 1.5 – 5 |
| Lid rail width | 1.2 mm | 0.8 – 3 |
| Lid length | 92.4 mm | 80 – 110 |
| Lid plate thickness | 2 mm | 1.2 – 4 |
| Lid skirt thickness | 1.2 mm | 0.8 – 3 |
| Lid skirt depth | 2 mm | 1 – 5 |
| Clearance per side, lid to rails | 0.25 mm | 0.1 – 0.6 |
| Thumb tab length | 8 mm | 4 – 20 |
| Thumb tab width | 12 mm | 6 – 40 |
| Thumb tab height | 3 mm | 1 – 8 |
| End stop thickness | 1.1 mm | 0.8 – 3 |
| Gap between base and lid | 110 mm | 80 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
