Enclosures and housings
SIWELLA V1 Main Body (SIWAK)
- Bounding box
- 18 × 18 × 97 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, manufacturing-ready 3D model of Part No. 1 — SIWELLA V1 Main Body. Part type: Hollow cylindrical tube. Exact dimensions: * Total length: 97 mm * Outer diameter: 18 mm * Inner diameter: 15.2 mm * Wall thickness: 1.4 mm * Edge fillet radius: R0.8 mm Design requirements: 1. Perfectly cylindrical and symmetrical geometry. 2. A continuous hollow channel running through the entire length. 3. Both ends must remain open. 4. Smooth, rounded edges with R0.8 mm fillets. 5. Uniform wall thickness of 1.4 mm. 6. Straight internal and external surfaces. 7. No threads, no holes, no slots, no decorations. 8. No additional components or unnecessary geometry. 9. The part must be a single solid, suitable for FDM 3D printing. 10. Matte black plastic appearance for visualization only. Important: Maintain all specified dimensions accurately. Do not change proportions or add design elements. Output: A clean, watertight, manifold 3D model suitable for manufacturing and further CAD engineering. Part name: SIWAK
Parameters
| Name | Value | Range |
|---|---|---|
| Total length | 97 mm | 20 – 200 |
| Outer diameter | 18 mm | 10 – 60 |
| Wall thickness | 1.4 mm | 0.8 – 5 |
| Outer edge fillet radius | 0.8 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,