Brackets and mounts
Sink-Edge Holder (edge 25-200 mm)
- Bounding box
- 132.0 × 323.5 × 46.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Adjusted Sink-Edge Holder (edge 25-200 mm): rim_t=200
Parameters
| Name | Value | Range |
|---|---|---|
| Turbine chamber inner radius | 45 mm | 42 – 52 |
| Turbine chamber wall | 6 mm | 5 – 10 |
| Bottom cap flange thickness | 5 mm | 3 – 6 |
| M3 clearance hole | 3.5 mm | 3.2 – 3.8 |
| Bolt head counterbore diameter | 6.4 mm | 5.5 – 8 |
| Bolt head counterbore depth | 3.2 mm | 2.5 – 3.5 |
| SINK EDGE THICKNESS (25 to 200 mm) | 200 mm | 25 – 200 |
| Extra play across the sink edge | 1.5 mm | 0.5 – 4 |
| Plate thickness | 6 mm | 5 – 10 |
| Ring frame outer radius | 56 mm | 54 – 62 |
| Drain opening radius (funnel hangs through) | 41 mm | 38 – 44 |
| Locating lip height | 4 mm | 2 – 8 |
| Locating lip clearance around the cap | 0.4 mm | 0.2 – 1.2 |
| Saddle wall width along the sink edge | 112 mm | 80 – 140 |
| Saddle wall thickness | 6 mm | 4 – 10 |
| How far the saddle walls hang down | 30 mm | 15 – 50 |
| Arm bar width (the span across the sink edge) | 60 mm | 40 – 112 |
| Arm stiffening rib height | 10 mm | 6 – 14 |
| Arm stiffening rib thickness | 6 mm | 4 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
