Enclosures and housings
Shotgun Slug Storage Case
- Bounding box
- 94.0 × 94.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Design a compact, round, 3D‑printable storage case for five 12‑gauge, 3‑inch shotgun slugs. Overall size: 90 mm diameter × 90 mm tall cylinder. Wall thickness: 3 mm. Bottom thickness: 3 mm. Interior: five vertical cylindrical holes arranged in a circle near the edge, each 20 mm diameter and 80 mm deep, open at the top so slugs slide straight down from the top into the slots. Leave a solid central pillar in the middle. Exterior: smooth, simple, functional, no text or logos. Lid: separate snap‑fit lid, 90 mm diameter, 10 mm tall, with a 2 mm inner rim that fits 2 mm inside the top of the case for a friction fit. Lid top is flat and slightly rounded at the edges. Style: minimal, utilitarian, optimized for FDM 3D printing, clean geometry, no internal supports needed.”
Parameters
| Name | Value | Range |
|---|---|---|
| Case outer diameter | 90 mm | 50 – 200 |
| Case height | 90 mm | 50 – 200 |
| Wall thickness (clearance around holes) | 3 mm | 1 – 10 |
| Hole diameter | 20 mm | 10 – 40 |
| Hole depth | 80 mm | 20 – 150 |
| Hole circle radius | 30 mm | 15 – 42 |
| Number of holes | 5 | 2 – 10 |
| Lid disc diameter | 90 mm | 50 – 200 |
| Lid thickness | 10 mm | 2 – 30 |
| Skirt height (snap fit over case) | 2 mm | 0.5 – 10 |
| Skirt inner diameter (friction fit) | 89.8 mm | 85 – 120 |
| Skirt outer diameter | 94 mm | 86 – 120 |
| Lid top edge fillet | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox