Enclosures and housings
ShopCam v3 – body, back cover, base puck, TPU lettering
- Bounding box
- 112 × 104 × 124.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
ShopCam v3 with TPU lettering: the SHOPCAM name is a 1.6 mm deep recess under the screen (front wall locally thickened behind it), filled with press-fit TPU letters (7 pieces) printed separately face down. PETG body, back cover and base puck plus TPU inlay, Bambu P1P.
Parameters
| Name | Value | Range |
|---|---|---|
| Body width | 112 mm | 104 – 130 |
| Body height | 104 mm | 100 – 125 |
| Body depth without cover | 58 mm | 54 – 70 |
| Corner radius | 8 mm | 3 – 14 |
| Side/top wall | 2.4 mm | 1.6 – 4 |
| Front face | 2 mm | 1.6 – 3 |
| Bottom wall, carries the motor | 4 mm | 3 – 6 |
| Front edge chamfer | 1.2 mm | 0 – 2.5 |
| Board length | 86.7 mm | 80 – 95 |
| Board width | 50 mm | 45 – 56 |
| Hole spacing, long | 77.8 mm | 70 – 84 |
| Hole spacing, short | 41.7 mm | 36 – 48 |
| Screen module height = standoff | 4.6 mm | 2 – 8 |
| Board lower edge above body bottom | 18 mm | 14 – 24 |
| Screen window width | 59 mm | 45 – 75 |
| Screen window height | 45 mm | 35 – 50 |
| Window shift, + = toward the USB end | 0 mm | -12 – 12 |
| USB centre above board lower edge | 15 mm | 8 – 30 |
| Camera downward tilt | 8 deg | 0 – 20 |
| Lens centre from camera board end | 11 mm | 6 – 20 |
| Lens hole | 11 mm | 8 – 14 |
| PIR lens hole | 10.4 mm | 8 – 14 |
| Slide ring radius | 26 mm | 20 – 28 |
| Home switch radius | 34 mm | 30 – 44 |
| Sensor bay width | 16 mm | 12 – 22 |
| Base diameter | 104 mm | 90 – 130 |
| Base height | 20 mm | 16 – 30 |
| 1/4-20 heat-set insert hole | 7.7 mm | 6 – 10 |
| Home cam channel depth | 7 mm | 4 – 9 |
| Letter size | 7 mm | 5 – 10 |
| Recess depth = TPU inlay thickness | 1.6 mm | 0.8 – 2.4 |
| Inlay oversize per side, + = tighter press fit | 0.05 mm | -0.15 – 0.2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,