Enclosures and housings
ShopCam case – ESP32-2432S028 + ESP32-CAM
- Bounding box
- 110.1 × 140.9 × 26.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Portable, wall-powered shop monitor case for an ESP32-2432S028 (Cheap Yellow Display, measured 86.7 x 50 x 12 mm, holes ~77.8 x 41.7 mm c-c) with a tilting ESP32-CAM + AM312 PIR pod, vented BME280/680 sensor cage, 1/4-20 tripod heat-set insert foot, screw-on back lid. PETG on Bambu P1P.
Parameters
| Name | Value | Range |
|---|---|---|
| Board length | 86.7 mm | 80 – 95 |
| Board width | 50 mm | 45 – 56 |
| Board total thickness, screen face to tallest back part | 12 mm | 8 – 18 |
| Mounting hole spacing, long side, centre-centre | 77.8 mm | 70 – 84 |
| Mounting hole spacing, short side, centre-centre | 41.7 mm | 36 – 48 |
| Screen module height = standoff height | 4.6 mm | 2 – 8 |
| Window width | 59 mm | 45 – 75 |
| Window height | 45 mm | 35 – 50 |
| Window shift along length, + = toward ESP32 end | 0 mm | -12 – 12 |
| Wall thickness | 3.2 mm | 2 – 5 |
| Front face thickness | 2 mm | 1.2 – 4 |
| Board clearance per side | 0.5 mm | 0.2 – 1.5 |
| Space for side JST plugs | 6 mm | 3 – 12 |
| Wiring space behind board | 10 mm | 5 – 20 |
| Back lid thickness | 2.4 mm | 1.6 – 4 |
| Foot height | 13 mm | 10 – 20 |
| 1/4-20 heat-set insert hole diameter | 8 mm | 6 – 10 |
| Insert hole depth | 10 mm | 6 – 12 |
| Pod length above pivot | 52 mm | 45 – 70 |
| Lens centre below pod top inside | 11 mm | 6 – 20 |
| Lens hole diameter | 9 mm | 6 – 14 |
| PIR lens hole diameter | 10.4 mm | 8 – 14 |
| Pod tilt shown in assembly | 0 deg | -35 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,