Enclosures and housings
Shelled Block with Slide Track and Back Cutout
- Bounding box
- 248.0 × 243.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric rectangular solid block measuring 248mm in width, 243mm in depth, and 120mm in height. Shell the block from the top face downward, leaving a uniform wall thickness of 4.0mm on the bottom and sides. Along the top inside edge of the left and right walls, subtract a rectangular groove measuring 4.2mm wide and 4.0mm deep to act as a slide-in track for a lid. On the back wall, create a centered rectangular cutout measuring 159.0mm wide by 44.5mm high, offset 12.0mm upward from the inner floor surface.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 248 mm | 10 – 500 |
| Depth | 243 mm | 10 – 500 |
| Height | 120 mm | 10 – 500 |
| Wall Thickness | 4 mm | 0.5 – 20 |
| Groove Vertical Opening | 4.2 mm | 1 – 20 |
| Groove Depth Into Wall | 4 mm | 0.5 – 20 |
| Back Cutout Width | 159 mm | 10 – 300 |
| Back Cutout Height | 44.5 mm | 10 – 150 |
| Cutout Offset from Inner Floor | 12 mm | 0 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox